Numaco Labeling
 
Numaco Labeling
cab

cab Hermes C

A print and apply system for production lines that prints labels in two colours, at 125 mm per second and 300 dpi, with a print width of 162.6 mm.

Last checked: 5 November 2026.
cab Hermes C, print and apply system
AI-generated image. The real product may differ.
162.6 mm

maximum print width

125 mm/s

maximum print speed

300 dpi

resolution

305 mm

maximum label roll diameter

What fits the Hermes C

305 mm76 mm coreLabel roll
176 mm162.6 mm printedLabels
165 mm25 mm core450 mRibbon

Drawn to one scale.

Labels: 46 to 176 mm wide and 20 to 356 mm high; 0.03 to 0.06 mm thick; on rolls up to 305 mm across, on a 76 mm core.

Ribbons: Up to 165 mm wide and up to 450 m long, on a 25 mm core, wound with the colour layer outside or inside; cab says a ribbon should be at least as wide as the liner material.

Specification

The base model. Options change some of these figures.

Printing

Methods
Thermal transfer in two colours, with two printheads
Resolution
300 dpi
Print width
Up to 162.6 mm
Print speed
Up to 125 mm/s
Printheads
Pressing force set for the label width; automatic ribbon saving on printhead 1
Backfeed
100 mm/s by default; distance 115 mm
Media sensors
Transmissive sensor, 4 to 47 mm from the locating edge, detecting the front margin of a label and the end of the material

Applying

Stroke applicators
4126C and 4136C, cylinder stroke 300 or 400 mm, for items at rest or in motion depending on the pad; about 20 labels a minute, calculated by cab with 100 mm high labels
Vacuum belt applicators
5326C for flat surfaces, items up to 0.5 m/s; 5426C for cylinders and corner wrap, items up to 0.3 m/s; up to 15 labels a minute, calculated by cab
Pads
Tamp-on, spring-mounted tamp-on and roll-on; silicone pads on request

Labels

Width
46 to 176 mm; liner 50 to 180 mm
Height
20 to 356 mm
Roll
Up to 305 mm outside diameter, on a 76 mm core; wound outside or inside
Thickness
0.03 to 0.06 mm
Liner rewinder
Up to 210 mm outside diameter, on a 76 mm core
Materials
Labels on a roll, in paper and synthetics such as PET, PE, PP, PVC, PU, acrylate and PI

Ribbons

Length
Up to 450 m
Width
Up to 165 mm
Core
25 mm
Roll
Up to 80 mm outside diameter; colour layer outside or inside

Connections

Standard
RS232-C (limited access), USB 2.0 Hi-Speed slave for a PC, Ethernet 10/100 Mbit/s with LPD, RawIP and FTP printing, DHCP, HTTP, FTP, SMTP, SNMP, TIME, Zeroconf, mDNS and SOAP, two USB master ports for an external control panel, keyboard, scanner or service key, CompactFlash Type I slot, digital I/O on a 25 pin SUB-D socket to IEC/EN 61131-2 types 1 and 3, and connections for a warning light, the applicator, an external e-stop and a compressed air main valve

Printer languages

cab JScript and abc Basic Compiler

Unit

Display
LCD graphics display, 60 x 40 mm, four lines of text; keys Pause, Feed, Cancel, Menu, Enter and four cursor keys; acoustic alarm on errors
Memory
64 MB RAM, 8 MB flash (IFFS); 266 MHz 32-bit processor
Size
550 x 630 x 320 mm, height by depth by width
Weight
Approx. 30 kg
Power
100 to 240 V AC, 50/60 Hz, PFC; standby under 10 W, typical operation 100 W, up to 165 W

Environment

Operating
5 to 40 °C; 10 to 85% humidity, non-condensing
Storage
0 to 60 °C; 20 to 80% humidity, non-condensing
Transport
−25 to 60 °C; 20 to 80% humidity, non-condensing

Options

4126C and 4136C stroke applicators Take the printed label on a pad and apply it in real time from all sides to packagings or items at rest or in motion, depending on the pad; labels 46 to 174 mm wide, cylinder strokes of 300 or 400 mm; the 4136C takes synthetic labels only.

5326C and 5426C vacuum belt applicators Move the label along a vacuum belt and apply it on an external signal while the next one prints; labels 46 to 174 mm wide and 80 to 356 mm high.

Pads Tamp-on pads, spring-mounted tamp-on pads for surfaces inclined by up to 8 degrees, and roll-on pads for flat surfaces of items in transport; silicone pads on request.

Stands and mounts A 1622 stand for vertical and a 1221 stand for horizontal installation, each for loads up to 75 kg, and mounts, brackets and clamped joints for fixing the unit in any orientation.

Covers Cover V for vertical and cover H for horizontal installation keep dust and damage away; cover H adds a plate on the side where items are processed.

External control panel An additional control panel with a CompactFlash Type I slot and a USB host interface, for printers whose own panel cannot be reached.

PS11 present sensor and TR2 hand switch For labels removed by hand: the PS11 prints the next label once one is removed or on a key touch, and the TR2 triggers dispensing on demand through the I/O interface.

Product sensors A 25 pin product sensor, or a 3 pin one for the vacuum belt applicators, triggers the label as soon as an item is detected, for example on a conveyor belt.

Drivers and documents

Printheads and wear parts

Part-number search
Partcab part number
Printhead 6/300 (300 dpi; two per printer)5970480.001
Print roller DR6 (platen roller; two per printer)5954245.001
Roller ZR6 (transport unit)5961220.001

The numbers are from cab Hermes C spare parts list of Edition 03/2025, part no. 9009780. We supply these parts, and compatible ones, under our own article numbers.

What wears, and what shortens its life: 5.5 Printheads and wear parts.

cab's terms of 19 November 2024 give 24 months on print and apply systems and, on the printhead, 24 months or 50 km of printing in thermal transfer or 24 months or 25 km in direct thermal, whichever comes first, with label material approved by cab in advance; wear parts such as the drive roller are not covered for wear.

Status

The Hermes C is current: cab has announced no end of sale.

Older models and their successors are on 5.6 Discontinued models.

Around the printer

Roller conveyors running through a warehouse

Installation: installed and commissioned by us, see 8.3 Installation. Outside Switzerland, each visit is quoted.

A technician with a screwdriver at the circuit board of an opened device

Repair: in our workshop near Zurich, see 8.1 Repair and RMA.

Pink tablets in a pharmaceutical production machine

In a GMP plant: IQ and OQ support for cab printers, see 1.4 IQ/OQ/PQ scope.

For the Hermes C on its own or with its installation, labels and ribbons, request a quote.

Last checked: 5 November 2026.

Talk to us

Preparing a validation, an inspection or a change to your labels?

The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.