Numaco Labeling
 
Numaco Labeling
cab

cab EOS2 and EOS5

4 inch printers for thermal transfer and direct thermal labels, at up to 150 mm per second and up to 300 dpi; the EOS 5 holds 203 mm rolls.

Last checked: 5 November 2026.
cab EOS2 and EOS5, desktop printer
AI-generated image. The real product may differ.
108 mm

maximum print width, at 203 dpi

150 mm/s

maximum print speed

300 dpi

highest resolution

203 mm

maximum roll diameter, EOS 5

What fits the EOS2 and EOS5

203 mm76 mm coreLabel roll
116 mm108 mm printedLabels
114 mm25.4 mm core360 mRibbon

Drawn to one scale.

Labels: 10 to 116 mm wide for one lane, 5 to 116 mm for several lanes; 0.05 to 0.6 mm thick; on rolls up to 152 mm across on the EOS 2 and 203 mm on the EOS 5, on a 38.1 to 76 mm core.

Ribbons: 25 to 114 mm wide and up to 360 m long, on a 25.4 mm core, wound with the ink side outside or inside. cab says a ribbon should be at least as wide as the liner material.

Specification

The base model. Options change some of these figures.

Printing

Methods
Thermal transfer and direct thermal
Resolution
203 dpi and 300 dpi
Print width
Up to 108 mm at 203 dpi; up to 105.7 mm at 300 dpi
Print speed
Up to 150 mm/s
Print length
Up to 13,500 mm at 203 dpi; up to 6,000 mm at 300 dpi
Media sensors
Gap sensor and reflective sensor from below or above, 0 to 58 mm from the centre; material passage up to 4 mm

Labels

Width
10 to 116 mm for one lane; 5 to 116 mm for several lanes
Height
From 5 mm without backfeed; from 12 mm with backfeed
Roll
Up to 152 mm outside diameter on the EOS 2, 203 mm on the EOS 5, on a 38.1 to 76 mm core; wound outside or inside
Thickness
0.05 to 0.6 mm
Liner
25 to 120 mm wide; 0.03 to 0.16 mm thick
Continuous
5 to 120 mm wide; 0.03 to 0.5 mm thick; cardboard up to 180 g/m2
Materials
Paper, cardboard and synthetics (PET, PE, PP, PI, PVC, PU, acrylate, Tyvek) on rolls or reels, fanfold as an option; shrink tube up to 120 mm wide and 1.1 mm thick; textile tape

Ribbons

Length
Up to 360 m
Width
25 to 114 mm
Core
25.4 mm
Roll
Up to 72 mm outside diameter; ink side outside or inside

Connections

Standard
RS232C, USB 2.0 Hi-Speed for a PC, Ethernet 10/100 Mbit/s with IPv4 and IPv6, static IP or DHCP, IEEE 802.1X, two USB host ports on the control panel and two on the back, SD card slot (SDHC and SDXC, up to 512 GB), USB host 24 V DC for peripherals
Optional
USB WLAN stick, 2.4 GHz 802.11b/g/n, or with a rod antenna 2.4 GHz and 5 GHz 802.11a/n/ac
Network protocols
RawIP (port 9100 by default), LPD/LPR, FTP/FTPS, HTTP/HTTPS, WebDAV, SOAP, SNMP v2, SMTP, PJL, OPC UA and OPC UA DI, VNC, mDNS

Printer languages

cab JScript and abc Basic Compiler; ZPL II as an option, with the data stream to be tested in advance

Unit

Display
4.3 inch colour touch display, 272 x 480 px
Memory
256 MB RAM, 50 MB flash (IFFS); 800 MHz 32-bit processor
Size
EOS 2 253 x 191 x 322 mm; EOS 5 264 x 247 x 412 mm, width by height by depth
Weight
EOS 2 4 kg; EOS 5 5 kg
Power
100 to 240 V AC, 50/60 Hz; standby under 5 W, typical operation 45 W, up to 100 W; mobile versions 16.5 to 25 V DC

Environment

Operating
5 to 40 °C; 10 to 85% humidity, non-condensing
Storage
0 to 60 °C; 20 to 85% humidity, non-condensing
Transport
−25 to 60 °C; 20 to 85% humidity, non-condensing

Options

Cutter A cutter that pivots away to change the material, for webs up to 120 mm wide and 0.05 to 1.1 mm thick, at up to 200 cuts a minute.

Cutter and perforation cutter Perforates continuous materials such as textiles or shrink tubes before they are separated by hand, and can also cut them; the material can be up to 45 mm wide.

External unwinder Holds rolls up to 390 mm across and 4 kg and centres them automatically; it cannot be fitted to the mobile versions.

Brake for fanfold labels Feeds fanfold labels tightly into the printer; it cannot be fitted to the mobile versions.

Mobile versions and battery pack The EOS 2 mobile and EOS 5 mobile run on 16.5 to 25 V DC at 300 dpi (203 dpi on request); an 18 V, 2.1 Ah, 36 Wh battery pack with charger fits under them and handles up to 500 print jobs of 100 x 68 mm labels at 15% density.

USB WLAN stick A USB WLAN stick for 2.4 GHz 802.11b/g/n, or one with a rod antenna for 2.4 GHz and 5 GHz 802.11a/n/ac, in hotspot or infrastructure mode.

External operation panel A second operation panel with the same functions, in landscape or portrait, for printers whose own panel cannot be reached; it connects by USB, with cables of 1.8 to 16 m.

Slim print rollers DR4-30 and DR4-60 print rollers for materials up to 30 mm or 60 mm wide, which keep slim materials and ribbons from wearing the roller or soiling the printhead.

Drivers and documents

Printheads and wear parts

Part-number search
Partcab part number
Printhead 203 dpi (EOS 2/200 and EOS 5/200)5966096.001
Printhead 300 dpi (EOS 2/300 and EOS 5/300)5965580.001
Print roller DR4 (platen roller)5965488.001
Print roller DR4-30, for materials up to 30 mm wide (option)5966218.001
Print roller DR4-60, for materials up to 60 mm wide (option)5966219.001

The numbers are from cab EOS2 and EOS5 spare parts list of Edition 01/2023, part no. 9003325. We supply these parts, and compatible ones, under our own article numbers.

What wears, and what shortens its life: 5.5 Printheads and wear parts.

cab's terms of 19 November 2024 give 24 months on the printer and, on the printhead, 24 months or 50 km of printing in thermal transfer or 24 months or 25 km in direct thermal, whichever comes first, with label material approved by cab in advance; wear parts such as the drive roller are not covered for wear.

Successor

The EOS2 and EOS5 are current: cab has announced no end of sale.

It replaced the EOS1 and EOS4. Older models and their successors are on 5.6 Discontinued models.

Around the printer

Roller conveyors running through a warehouse

Installation: installed and commissioned by us, see 8.3 Installation. Outside Switzerland, each visit is quoted.

A technician with a screwdriver at the circuit board of an opened device

Repair: in our workshop near Zurich, see 8.1 Repair and RMA.

Pink tablets in a pharmaceutical production machine

In a GMP plant: IQ and OQ support for cab printers, see 1.4 IQ/OQ/PQ scope.

For the EOS2 and EOS5 on its own or with its installation, labels and ribbons, request a quote.

Last checked: 5 November 2026.

Talk to us

Preparing a validation, an inspection or a change to your labels?

The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.