Numaco Labeling
 
Numaco Labeling
Service and support

Maintenance packages

A maintenance package writes down in advance what we look after, how often and where.

There are three: Print Care for the printers, Software Care for the label software, and GMP Care for a label system that falls under GMP.

Surgical instruments on a blue drape

Print Care

For your label printers and print engines.

  • A preventive maintenance visit every year for each printer: cleaning, a check of the printhead, platen roller and other wear parts, the firmware brought to the version you approved, the media sensor calibrated, and test labels printed on your material.
  • A service report for each printer, by serial number: what we checked, what we replaced, and what will soon need replacing.

Software Care

For your label software, its templates and its connections to your systems: CODESOFT, SENTINEL, LABEL ARCHIVE, TEKLYNX CENTRAL, BarTender or NiceLabel.

  • Remote support for the software, as on 8.5 Remote support.
  • New versions of the software and drivers tested by us before they are installed on your system.
  • A copy of your templates and configuration kept after every change.
  • The vendor's subscription or support contract tracked and renewed before it ends, see 4.9 Licensing and maintenance.

Print Care and Software Care can be combined.

GMP Care

For a label system that falls under GMP, on the software and printers listed on 1.4 IQ/OQ/PQ scope.

Everything in Print Care and Software Care, plus:

  • Every change under your change control. We prepare the change, test it and hand over the test evidence, as in step 12 of 1.3 Project responsibilities.
  • Support for your periodic evaluation. EU GMP Annex 11, in its revision of January 2011, asks in section 11 that you evaluate the system periodically, including its incidents, problems and upgrade history. Once a year we give you our part: every change, incident and update we handled.
  • The written agreement Annex 11 asks for. Section 3.1 requires a formal agreement with any service provider who maintains a computerised GMP system, including by remote access, stating the provider's responsibilities. The package contract is written as that agreement.

Where

On site in Switzerland.

In Germany, France, Italy and Austria, the work is done remotely and in our workshop, and an on-site visit, the yearly printer visit included, is assessed and quoted per visit.

What no package covers

  • Labels, ribbons, printheads and spare parts, unless the contract lists them.
  • Changes inside your ERP or other business systems.
  • Validating your process, approving documents or releasing the system: those stay with you.

Each package lists the printers, by serial number, and the licences it covers; it runs for one year and is quoted per installation.

Write to [email protected].

Last checked: 21 October 2026.

Talk to us

Preparing a validation, an inspection or a change to your labels?

The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.