cab SQUIX UHF RFID
4 inch SQUIX label printers with an optional UHF RFID module that writes the RFID tag and prints the label, at up to 300 mm per second and 600 dpi.

maximum print width, SQUIX 4.3 at 300 dpi
maximum print speed, at 203 and 300 dpi
highest resolution, SQUIX 4
UHF RFID module types: OM, RS, HS and OM / RS
What fits the SQUIX UHF RFID
Drawn to one scale.
Labels: 20 to 116 mm wide on the SQUIX 4.3 and 4, 4 to 110 mm on the M versions; 0.03 to 0.6 mm thick; on rolls up to 205 mm across, on a 38.1 to 76 mm core; RFID labels to cab's separate specification.
Ribbons: 25 to 114 mm wide and up to 600 m long, on a 25.4 mm core, wound with the colour layer outside or inside. cab says a ribbon should be at least as wide as the liner material.
See , , or start from what the label must survive in the .
Specification
The base model. Options change some of these figures.
Printing
- Methods
- Thermal transfer; direct thermal on the SQUIX 4.3 and 4.3 M and, as a possible mode, on the SQUIX 4 and 4 M at 300 dpi
- Resolution
- SQUIX 4.3 and 4.3 M: 203 or 300 dpi; SQUIX 4 and 4 M: 300 or 600 dpi
- Print width
- 104 mm at 203 dpi; 108.4 mm at 300 dpi on the 4.3 models; 105.7 mm at 300 and 600 dpi on the 4 models
- Print speed
- Up to 300 mm/s at 203 and 300 dpi; up to 150 mm/s at 600 dpi
- Print length
- Up to 13,500 mm at 203 dpi; 6,000 mm at 300 dpi; 1,500 mm at 600 dpi
RFID
- Modules
- OM 4 (on metal), RS 4 (regular sensitivity), HS 4 (high sensitivity) and OM / RS 4 (both antennas), as an option on the SQUIX 4.3, 4, 4.3 M and 4 M
- Antennas
- OM on the printhead; RS and HS on the feeding unit; OM / RS has one in each place
- Standard
- UHF EPC Class 1 Gen 2; interface specification ISO/IEC 18000-63
- Frequencies
- ETSI and FCC read antenna frequencies
- Functions
- Tag calibration, with characteristic curves printable through the status function; TID, EPC and user memory read on the fly and shown on the display; label marked invalid (void) after errors; statistics; maximum number of read and write errors
- Programming
- JScript and ZPL II
Labels
- Width
- 20 to 116 mm on the SQUIX 4.3 and 4; 4 to 110 mm on the 4.3 M and 4 M
- Roll
- Up to 205 mm outside diameter, on a 38.1 to 76 mm core; wound outside or inside
- Thickness
- 0.03 to 0.6 mm
- Types
- RFID labels to cab's separate specification
Ribbons
- Length
- Up to 600 m
- Width
- 25 to 114 mm
- Core
- 25.4 mm
- Roll
- Up to 80 mm outside diameter; colour layer outside or inside
Connections
- Standard
- RS232-C, USB 2.0 Hi-Speed for a PC, Ethernet 10/100 Mbit/s with IPv4 and IPv6, static IP or DHCP, IEEE 802.1X, two USB host ports on the control panel and two on the back, SD card slot (SDHC and SDXC, up to 512 GB), USB host 24 V DC for peripherals
- Optional
- Digital I/O interface with 8 inputs and 8 outputs; USB WLAN stick, 2.4 GHz 802.11b/g/n, or with a rod antenna 2.4 GHz and 5 GHz 802.11a/n/ac
- Network protocols
- RawIP (port 9100 by default), LPD/LPR, FTP/FTPS, HTTP/HTTPS, WebDAV, SOAP, SNMP v2, SMTP, PJL, OPC UA and OPC UA DI, VNC, mDNS; cab names OPC UA and WebDAV for integration into logistics systems
Printer languages
- cab JScript and abc Basic Compiler; ZPL II as an option, with the data stream to be tested in advance
Unit
- Display
- 4.3 inch colour touch display, 272 x 480 px
- Versions
- Basic and peel-off units, with the material guided aligned to the left or in centred position (M versions)
- Memory
- 256 MB RAM, 50 MB flash (IFFS); 800 MHz 32-bit processor
- Size
- 252 x 288 x 460 mm, width by height by depth
- Weight
- 10 kg
- Power
- 100 to 240 V AC, 50/60 Hz, PFC; standby under 10 W, typical operation 100 W, up to 200 W
Environment
- Operating
- 5 to 40 °C; 10 to 85% humidity, non-condensing
- Storage
- 0 to 60 °C; 20 to 85% humidity, non-condensing
- Transport
- −25 to 60 °C; 20 to 85% humidity, non-condensing
Options
UHF RFID OM 4 module An antenna on the printhead, preferred when the labels are applied to metal surfaces.
UHF RFID RS 4 module A regular-sensitivity antenna on the feeding unit, the standard for all common RFID labels.
UHF RFID HS 4 module A high-sensitivity antenna on the feeding unit, for RFID labels with specific radiation characteristics.
UHF RFID OM / RS 4 module One antenna on the printhead and one on the feeding unit, each able to read and write labels one by one.
Peel-off versions Peel-off versions with an internal rewinder are offered with the RFID modules, with the material guided aligned to the left or in centred position.
USB WLAN stick A USB WLAN stick for 2.4 GHz 802.11b/g/n, or one with a rod antenna for 2.4 GHz and 5 GHz 802.11a/n/ac, in hotspot or infrastructure mode.
Drivers and documents
- From cab: the drivers, firmware and user guide are on cab's page for the SQUIX UHF RFID.
- Set up as a fleet: cablabel S3, cabFirmwareUpdater.
- From SAP: through TEKLYNX SENTINEL, see 3.1 SAP label printing.
- From label software: through cab's driver, see Software licences.
- Calibration: PrinterCal, our own software, sets media sensor, darkness and print position on cab printers.
Printheads and wear parts
Part-number search| Part | cab part number |
|---|---|
| Printhead 4.3/200 SQUIX RFID, for the OM and OM / RS modules (203 dpi) | 5987177.001 |
| Printhead 4.3/300 SQUIX RFID, for the OM and OM / RS modules (300 dpi) | 5987178.001 |
| Printhead 4/300 SQUIX RFID, for the OM and OM / RS modules (300 dpi) | 5987179.001 |
| Printhead 4.3/200 (RS and HS modules, 203 dpi) | 5977382.001 |
| Printhead 4.3/300 (RS and HS modules, 300 dpi) | 5977383.001 |
| Printhead 4/300 (RS and HS modules, 300 dpi) | 5977444.001 |
| Print roller DR4 (platen roller), thermal transfer printers | 5954180.001 |
| Print roller DRS4, silicone, direct thermal printers | 5954985.001 |
The numbers are from cab SQUIX 4 and SQUIX 4.3 spare parts list, with the RFID section of Edition 10/2026, part no. 9009983. We supply these parts, and compatible ones, under our own article numbers.
What wears, and what shortens its life: 5.5 Printheads and wear parts.
cab's terms of 19 November 2024 give 24 months on the printer and, on the printhead, 24 months or 50 km of printing in thermal transfer or 24 months or 25 km in direct thermal, whichever comes first, with label material approved by cab in advance; wear parts such as the drive roller are not covered for wear.
Status
The SQUIX UHF RFID is current: cab has announced no end of sale.
Older models and their successors are on 5.6 Discontinued models.
Around the printer

Installation: installed and commissioned by us, see 8.3 Installation. Outside Switzerland, each visit is quoted.

Repair: in our workshop near Zurich, see 8.1 Repair and RMA.

In a GMP plant: IQ and OQ support for cab printers, see 1.4 IQ/OQ/PQ scope.
For the SQUIX UHF RFID on its own or with its installation, labels and ribbons, request a quote.
Last checked: 5 November 2026.
Preparing a validation, an inspection or a change to your labels?
The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.




