Numaco Labeling
 
Numaco Labeling
cab

cab SQUIX 8.3

An 8 inch industrial label printer for thermal transfer and direct thermal labels, at up to 150 mm per second and 300 dpi.

Last checked: 5 November 2026.
cab SQUIX 8.3, industrial printer
AI-generated image. The real product may differ.
216 mm

maximum print width

150 mm/s

maximum print speed

300 dpi

resolution

220 mm

maximum label width

What fits the SQUIX 8.3

205 mm76 mm coreLabel roll
220 mm216 mm printedLabels
220 mm25.4 mm core360 mRibbon

Drawn to one scale.

Labels: 46 to 220 mm wide; 0.05 to 0.6 mm thick; on rolls up to 205 mm across, on a 38.1 to 76 mm core.

Ribbons: 220 mm wide and up to 360 m long, on a 25.4 mm core, wound with the colour layer outside or inside. cab says a ribbon should be at least as wide as the liner material.

Specification

The base model. Options change some of these figures.

Printing

Methods
Thermal transfer and direct thermal
Resolution
300 dpi
Print width
Up to 216 mm
Print speed
Up to 150 mm/s
Print length
Up to 3,000 mm
Media sensors
Transmissive sensor and reflective sensor from below or above, 5 to 60 mm from the locating edge; material passage up to 2 mm, 5 mm as an option

Labels

Width
46 to 220 mm
Height
From 25 mm, with or without backfeed and when peeling
Roll
Up to 205 mm outside diameter, on a 38.1 to 76 mm core; wound outside or inside
Thickness
0.05 to 0.6 mm
Liner
50 to 235 mm wide
Continuous
50 to 235 mm wide; 0.03 to 0.5 mm thick; cardboard up to 300 g/m2
Materials
Paper, cardboard and synthetics (PET, PE, PP, PI, PVC, PU, acrylate, Tyvek) on rolls or fanfold

Ribbons

Length
Up to 360 m
Width
220 mm
Core
25.4 mm
Roll
Up to 80 mm outside diameter; colour layer outside or inside

Connections

Standard
RS232-C, USB 2.0 Hi-Speed for a PC, Ethernet 10/100 Mbit/s with IPv4 and IPv6, static IP or DHCP, IEEE 802.1X, two USB host ports on the control panel and two on the back, SD card slot (SDHC and SDXC, up to 512 GB), USB host 24 V DC for peripherals
Optional
Digital I/O interface with 8 inputs and 8 outputs; USB WLAN stick, 2.4 GHz 802.11b/g/n, or with a rod antenna 2.4 GHz and 5 GHz 802.11a/n/ac
Network protocols
RawIP (port 9100 by default), LPD/LPR, FTP/FTPS, HTTP/HTTPS, WebDAV, SOAP, SNMP v2, SMTP, PJL, OPC UA and OPC UA DI, VNC, mDNS

Printer languages

cab JScript and abc Basic Compiler; ZPL II as an option, with the data stream to be tested in advance

Unit

Display
4.3 inch colour touch display, 272 x 480 px
Versions
Basic with tear-off plate; P with peel-off and internal rewinder
Memory
256 MB RAM, 50 MB flash (IFFS); 800 MHz 32-bit processor
Size
352 x 288 x 460 mm, width by height by depth
Weight
15 kg
Power
100 to 240 V AC, 50/60 Hz, PFC; standby under 10 W, typical operation 100 W, up to 200 W

Environment

Operating
5 to 40 °C; 10 to 85% humidity, non-condensing
Storage
0 to 60 °C; 20 to 85% humidity, non-condensing
Transport
−25 to 60 °C; 20 to 85% humidity, non-condensing

Options

CU800 cutter Cuts paper and self-adhesive labels, cardboard, textile and synthetic materials up to 232 mm wide and 0.05 to 0.5 mm thick, at up to 100 cuts a minute and from a cutting length of 5 mm.

Peel-off version The SQUIX 8.3 P peels labels off the liner on a peel-off plate and winds the liner on an internal rewinder (up to 142 mm across, on a 40 mm core); labels can be taken by hand or by an applicator.

External rewinder ER3/210 Winds a web up to 235 mm wide, outside or inside, on rolls up to 205 mm across, on a 40 mm core or a 76 mm cardboard core with an adapter.

USB WLAN stick A USB WLAN stick for 2.4 GHz 802.11b/g/n, or one with a rod antenna for 2.4 GHz and 5 GHz 802.11a/n/ac, in hotspot or infrastructure mode.

Digital I/O interface Digital I/O interface with 8 inputs and 8 outputs, to IEC/EN 61131-2 types 1 and 3, so that a PLC, a sensor or a hand switch can trigger printing; status and errors are signalled.

Drivers and documents

Printheads and wear parts

Part-number search
Partcab part number
Printhead 8.3/300 (300 dpi)5987351.001
Print roller DR8 (platen roller)5954103.001
Deflection roller RR8, peel-off version5984195.001

The numbers are from cab SQUIX 8.3 spare parts list of Edition 07/2025, part no. 9003826. We supply these parts, and compatible ones, under our own article numbers.

What wears, and what shortens its life: 5.5 Printheads and wear parts.

cab's terms of 19 November 2024 give 24 months on the printer and, on the printhead, 24 months or 50 km of printing in thermal transfer or 24 months or 25 km in direct thermal, whichever comes first, with label material approved by cab in advance; wear parts such as the drive roller are not covered for wear.

Successor

The SQUIX 8.3 is current: cab has announced no end of sale.

It replaced the A8+. Older models and their successors are on 5.6 Discontinued models.

Around the printer

Roller conveyors running through a warehouse

Installation: installed and commissioned by us, see 8.3 Installation. Outside Switzerland, each visit is quoted.

A technician with a screwdriver at the circuit board of an opened device

Repair: in our workshop near Zurich, see 8.1 Repair and RMA.

Pink tablets in a pharmaceutical production machine

In a GMP plant: IQ and OQ support for cab printers, see 1.4 IQ/OQ/PQ scope.

For the SQUIX 8.3 on its own or with its installation, labels and ribbons, request a quote.

Last checked: 5 November 2026.

Talk to us

Preparing a validation, an inspection or a change to your labels?

The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.