TSC PEX-2260, PEX-2360
A 6 inch print engine for label applicators, in left and right hand versions, with a 168 mm print width, at up to 356 mm per second and 203 dpi.

maximum print width
maximum print speed, at 203 dpi
highest resolution in the series
net weight
What fits the PEX-2260, PEX-2360
Drawn to one scale.
Labels: Labels 50.8 to 180 mm wide including the liner and 0.076 to 0.305 mm thick; TSC gives a maximum unwind force of 1,800 g and a maximum rewind force of 2,400 g for the label web.
Ribbons: Ribbons 76 to 180 mm wide and 600 m long, up to 90 mm across, on a 25.4 mm core, ink coated outside or inside.
See , , or start from what the label must survive in the .
Specification
The base model. Options change some of these figures.
Printing
- Methods
- Thermal transfer and direct thermal
- Resolution
- 203 dpi (PEX-2260); 300 dpi (PEX-2360)
- Print width
- Up to 168 mm
- Print speed
- Up to 356 mm/s; PEX-2360: 305 mm/s
- Print length
- Up to 14,732 mm; PEX-2360: 6,604 mm
- Print accuracy
- Printing deviation within ±0.4 mm
- Peel-off angle
- Adjustable over 15 degrees, from −18 to −3 degrees
- Media sensors
- Gap transmissive sensor (position adjustable, 1 to 98 mm), black mark reflective sensor (bottom or top, switchable, position adjustable, 5 to 92 mm), ribbon end sensor (transmissive), ribbon encoder sensor, head open sensor, media cover open sensor, label holder cover open sensor
Labels
- Width
- 50.8 to 180 mm, liner included
- Length in peel-off mode
- 25.4 to 152 mm
- Thickness
- 0.076 to 0.305 mm; RFID tags 0.076 to 1.2 mm; ribbon saver mode 0.076 to 0.3 mm
- Gaps and marks
- Gap height 2 mm minimum; black mark height 2 mm and width 8 mm minimum
- Types
- Continuous, die-cut, black mark, fan-fold, notched (outside wound)
- Web force
- Maximum unwind force 1,800 g; maximum rewind force 2,400 g
Ribbons
- Length
- 600 m, up to 90 mm outside diameter
- Width
- 76 to 180 mm
- Core
- 25.4 mm
- Winding
- Ink coated outside or inside
Connections
- Standard
- RS-232 (up to 115,200 bps), USB 2.0, internal Ethernet 10/100 Mbps, two USB host ports (front and rear) for USB storage, GPIO (DB15F) with Centronics
- Optional
- Internal MFi Bluetooth 5.0 fitted at the factory; from the dealer, 802.11 a/b/g/n/ac Wi-Fi with Bluetooth 4.2 combo module, internal Bluetooth and GPIO (DB25F)
Printer languages
- TSPL-EZD with EPL, ZPL, ZPL II and DPL emulation; TSPL-EZS with EPL, ZPL, ZPL II and SBPL emulation as an option
Unit
- Display
- 3.5 inch IPS colour QVGA display, multi-language; one status indicator, 6 operation buttons
- Memory
- 512 MB flash, 512 MB DDR2 RAM; USB device memory (FAT32); micro SD card reader up to 32 GB
- Clock
- Real-time clock and buzzer, standard
- Versions
- Left hand (PEX-2260L, PEX-2360L) and right hand (PEX-2260R, PEX-2360R); mounts in any orientation
- Size
- 245 x 300 x 450 mm, width by height by depth
- Weight
- 14.35 kg net; 17.35 kg gross
- Power
- Auto-sensing power supply, 100 to 240 V AC, 50 to 60 Hz; 243 W in total
Environment
- Operating
- −5 to 45 °C; 25 to 85% humidity, non-condensing
- Storage
- −40 to 60 °C; 10 to 90% humidity, non-condensing
Options
UHF RFID A dealer option that encodes RAIN UHF tags to GS1 EPC Gen2 v2 and ISO 18000-63 with a fixed position antenna, for labels and tags with a pitch of at least 15.9 mm and RFID tags up to 1.2 mm thick.
Ribbon saver A dealer option that reduces ribbon waste, with a ribbon saver mode for media 0.076 to 0.3 mm thick.
Bluetooth and Wi-Fi MFi Bluetooth 5.0 is fitted at the factory, and the dealer supplies an internal Bluetooth module or an 802.11 a/b/g/n/ac Wi-Fi with Bluetooth 4.2 combo module.
GPIO (DB25F) interface A DB25F GPIO interface from the dealer, besides the standard DB15F GPIO with Centronics, for connecting label applicators.
Drivers and documents
- From TSC: the drivers, firmware and user guide are on TSC's page for the PEX-2260, PEX-2360.
- Set up as a fleet: TSC Console, TSC Console Web, SOTI Connect.
- From SAP: through TEKLYNX SENTINEL, see 3.1 SAP label printing.
- From label software: through TSC's driver, see Software licences.
- Calibration: PrinterCal, our own software, sets media sensor, darkness and print position on TSC printers.
Printheads and wear parts
We supply printheads and wear parts for the printers we sell, the printer maker's own and compatible ones. Send us the model and, if you have it, the serial number at [email protected], and we name the part.
What wears, and what shortens its life: 5.5 Printheads and wear parts.
TSC's European warranty gives print engines 24 months on the engine, excluding the printhead, platen roller, cutter, peeler and options, 12 months or 25 km (1 million inches) on the printhead and 12 months or 50 km (2 million inches) on the platen roller, whichever comes first.
Successor
The PEX-2260, PEX-2360 are current: TSC has announced no end of sale.
It replaced the PEX-1000 Series and PEX-1001 Series. Older models and their successors are on 5.6 Discontinued models.
Around the printer

Installation: installed and commissioned by us, see 8.3 Installation. Outside Switzerland, each visit is quoted.

Repair: in our workshop near Zurich, see 8.1 Repair and RMA.

Labels and ribbons: from us too, chosen by what the label must survive, see the .
For the PEX-2260, PEX-2360 on its own or with its installation, labels and ribbons, request a quote.
Last checked: 5 November 2026.
Preparing a validation, an inspection or a change to your labels?
The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.




