TSC Alpha-30L
A 3 inch direct thermal mobile printer for labels and receipts, with a 72 mm print width, at up to 127 mm per second and 203 dpi.

maximum print width
maximum print speed
resolution
weight with battery
What fits the Alpha-30L
Drawn to one scale.
Labels: Labels and receipts 25.4 to 80 mm wide including the liner, 0.06 to 0.16 mm thick, on rolls up to 67 mm across on a 12.7 mm core, or on 19.1 mm, or 25.4 and 38.1 mm, cores with adaptors.
Ribbons: none, this printer prints direct thermal.
See , or start from what the label must survive in the .
Specification
The base model. Options change some of these figures.
Printing
- Methods
- Direct thermal only
- Resolution
- 203 dpi (8 dots/mm)
- Print width
- Up to 72 mm
- Print speed
- Up to 127 mm/s; 50.8 or 76.2 mm/s in peeler mode
- Print length
- Up to 2,794 mm
- Media sensors
- Reflective, transmissive, peel and head open
Labels
- Width
- 25.4 to 80 mm, liner included
- Length
- 12.7 to 2,794 mm; 25.4 to 152.4 mm in peeler mode
- Thickness
- 0.06 to 0.16 mm
- Roll
- Up to 67 mm outside diameter
- Core
- 12.7 mm; 19.1 mm, or 25.4 and 38.1 mm, with adaptors
- Types
- Die-cut, black mark, receipt, fan-fold, linerless, continuous (outside wound)
- Sensor position
- Centre, right or left side, set at the factory
Connections
- Standard
- One of two versions: USB Type C 2.0, MFi Bluetooth 5.0 and a passive NFC tag; or USB Type C 2.0, 802.11 a/b/g/n/ac Wi-Fi, Bluetooth 5.0 and a passive NFC tag
- USB Type C
- Communication only
Printer languages
- TSPL-EZC with EPL2, ZPL2 and CPCL emulation; ESC-POS
Unit
- Display
- 2.3 inch colour LCD, 320 x 240 pixels; 7 buttons, 2 LED indicators
- Memory
- 128 MB SDRAM and 128 MB flash; 256 MB SDRAM and 512 MB flash as a factory option; microSD card reader up to 32 GB
- Clock
- Real-time clock, standard
- Size
- 117 x 173 x 79 mm, width by height by depth
- Weight
- 745 g with battery
- Battery
- 7.4 V DC, 3,030 mAh Li-ion smart battery, 500 cycles; 23.5 hours at one label every 2 minutes, 12.5% print area, over Bluetooth; charges in 3.5 to 5 hours
Environment
- Operating
- −20 to 50 °C; 10 to 90% humidity, non-condensing
- Storage
- −30 to 70 °C; 10 to 90% humidity, non-condensing
- Charging
- 0 to 40 °C; 10 to 90% humidity, non-condensing
- Drop
- 1.8 m; 2.5 m in the protective case
- Tumble
- 1.0 m
- Protection
- IP54, without the case and with the paper path excluded
Options
Linerless kit A factory-fitted kit that lets the printer print on linerless media.
Media core adaptors Adaptors for rolls on 19.1 mm cores, or on 25.4 and 38.1 mm cores; the printer's own core size is 12.7 mm.
Li-ion smart battery A 3,030 mAh battery that reports battery information, charge cycles and remaining capacity to TSC Console and SOTI Connect.
Docking cradles and battery chargers 1-slot and 4-slot docking cradles charge the printer without removing the battery, and 1-slot and 4-slot battery chargers charge the battery on its own.
Vehicle mounts A vehicle mount adaptor for RAM mounts and a quick release vehicle mount kit mount the printer on a forklift.
Protective case with shoulder strap A case for harsh environments that raises the drop rating from 1.8 m to 2.5 m.
Vehicle power 12 to 24 V and 12 to 60 V DC vehicle power adaptors, a 12 to 60 V open end adaptor, and a 12 to 48 V wire to wire battery eliminator with a dummy battery pack power the printer from a vehicle.
External fanfold media holder A holder for external fanfold media, available with an expansion kit or with a quick release vehicle mount kit.
Drivers and documents
- From TSC: the drivers, firmware and user guide are on TSC's page for the Alpha-30L.
- Set up as a fleet: TSC Console, TSC Console Web, SOTI Connect.
- From label software: through TSC's driver, see Software licences.
- Calibration: PrinterCal, our own software, sets media sensor, darkness and print position on TSC printers.
Printheads and wear parts
We supply printheads and wear parts for the printers we sell, the printer maker's own and compatible ones. Send us the model and, if you have it, the serial number at [email protected], and we name the part.
What wears, and what shortens its life: 5.5 Printheads and wear parts.
TSC's European warranty gives mobile printers 24 months on the printer, 12 months or 25 km (1 million inches) on the printhead, 12 months or 50 km (2 million inches) on the platen roller, whichever comes first, and 12 months on the battery.
Status
The Alpha-30L is current: TSC has announced no end of sale.
Older models and their successors are on 5.6 Discontinued models.
Around the printer

Installation: installed and commissioned by us, see 8.3 Installation. Outside Switzerland, each visit is quoted.

Repair: in our workshop near Zurich, see 8.1 Repair and RMA.

Labels and ribbons: from us too, chosen by what the label must survive, see the .
For the Alpha-30L on its own or with its installation, labels and ribbons, request a quote.
Last checked: 5 November 2026.
Preparing a validation, an inspection or a change to your labels?
The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.




