TSC Alpha-40L
A 4 inch direct thermal mobile printer for labels and receipts, with a 104 mm print width, at up to 127 mm per second and 203 dpi.

maximum print width
maximum print speed
resolution
weight with battery
What fits the Alpha-40L
Drawn to one scale.
Labels: Labels and receipts 50.8 to 112 mm wide including the liner, 0.06 to 0.16 mm thick, on rolls up to 67 mm across on a 12.7 mm core, or on 19.1 mm, or 25.4 and 38.1 mm, cores with adaptors; the Alpha-40L RFID takes 25.4 mm cores.
Ribbons: none, this printer prints direct thermal.
See , or start from what the label must survive in the .
Specification
The base model. Options change some of these figures.
Printing
- Methods
- Direct thermal only
- Resolution
- 203 dpi (8 dots/mm)
- Print width
- Up to 104 mm
- Print speed
- Up to 127 mm/s; 50.8 or 76.2 mm/s in peeler mode
- Print length
- Up to 2,794 mm
- Media sensors
- Reflective, transmissive, peel and head open; the RFID model has no peel sensor
- RFID model
- RAIN UHF passive (GS1 EPC Gen2 v2, ISO 18000-63), fixed position antenna; minimum label or tag pitch 15.9 mm; RFID printing in TSPL and ZPL2; counters track good and overstruck labels
Labels
- Width
- 50.8 to 112 mm, liner included
- Length
- 12.7 to 2,794 mm; 25.4 to 152.4 mm in peeler mode; 15.9 to 2,794 mm on the RFID model
- Thickness
- 0.06 to 0.16 mm
- Roll
- Up to 67 mm outside diameter
- Core
- 12.7 mm; 19.1 mm, or 25.4 and 38.1 mm, with adaptors. RFID model: 25.4 mm, with 19.1 and 38.1 mm adaptors supplied
- Types
- Die-cut, black mark, receipt, fan-fold, linerless, continuous (outside wound); no linerless on the RFID model
- Sensor position
- Centre, right or left side, set at the factory
Connections
- Standard
- One of two versions: USB Type C 2.0, MFi Bluetooth 5.0 and a passive NFC tag; or USB Type C 2.0, 802.11 a/b/g/n/ac Wi-Fi, Bluetooth 5.0 and a passive NFC tag
- USB Type C
- Communication only
Printer languages
- TSPL-EZC with EPL2, ZPL2 and CPCL emulation; ESC-POS
Unit
- Display
- 2.3 inch colour LCD, 320 x 240 pixels; 7 buttons, 2 LED indicators
- Memory
- 128 MB SDRAM and 128 MB flash; 256 MB SDRAM and 512 MB flash as a factory option; microSD card reader up to 32 GB
- Clock
- Real-time clock, standard
- Size
- 160 x 191 x 79 mm, width by height by depth
- Weight
- 985 g with battery; 1,025 g for the RFID model
- Battery
- 7.4 V DC, 6,200 mAh Li-ion smart battery, 500 cycles; 45 hours at one label every 2 minutes, 12.5% print area, over Bluetooth; charges in 4.5 to 6.5 hours
Environment
- Operating
- −20 to 50 °C; 10 to 90% humidity, non-condensing
- Storage
- −30 to 70 °C; 10 to 90% humidity, non-condensing
- Charging
- 0 to 40 °C; 10 to 90% humidity, non-condensing
- Drop
- 1.8 m; 2.5 m in the protective case
- Tumble
- 1.0 m
- Protection
- IP54, without the case and with the paper path excluded
Options
Alpha-40L RFID model A separate model that prints and encodes RAIN UHF labels to GS1 EPC Gen2 v2 and ISO 18000-63 and overstrikes labels that fail to encode.
Linerless kit A factory-fitted kit that lets the Alpha-40L print on linerless media.
Media core adaptors Adaptors for rolls on 19.1 mm cores, or on 25.4 and 38.1 mm cores; the Alpha-40L's own core size is 12.7 mm.
Smart battery, cradles and chargers A 6,200 mAh Li-ion smart battery that reports capacity, charge cycles and remaining capacity to TSC Console and SOTI Connect, with 1-slot and 4-slot docking cradles and battery chargers.
Vehicle mounts A vehicle mount adaptor for RAM mounts and a quick release vehicle mount kit mount the printer on a forklift.
Protective case with shoulder strap A case for harsh environments that raises the drop rating from 1.8 m to 2.5 m.
Vehicle power 12 to 24 V and 12 to 60 V DC vehicle power adaptors, a 12 to 60 V open end adaptor, and a 12 to 48 V wire to wire battery eliminator with a dummy battery pack power the printer from a vehicle.
External fanfold media holder A holder for external fanfold media, available with an expansion kit or with a quick release vehicle mount kit.
Drivers and documents
- From TSC: the drivers, firmware and user guide are on TSC's page for the Alpha-40L.
- Set up as a fleet: TSC Console, TSC Console Web, SOTI Connect.
- From label software: through TSC's driver, see Software licences.
- Calibration: PrinterCal, our own software, sets media sensor, darkness and print position on TSC printers.
Printheads and wear parts
We supply printheads and wear parts for the printers we sell, the printer maker's own and compatible ones. Send us the model and, if you have it, the serial number at [email protected], and we name the part.
What wears, and what shortens its life: 5.5 Printheads and wear parts.
TSC's European warranty gives mobile printers 24 months on the printer, 12 months or 25 km (1 million inches) on the printhead, 12 months or 50 km (2 million inches) on the platen roller, whichever comes first, and 12 months on the battery.
Successor
The Alpha-40L is current: TSC has announced no end of sale.
It replaced the Alpha-4L, M4L2 and M4L. Older models and their successors are on 5.6 Discontinued models.
Around the printer

Installation: installed and commissioned by us, see 8.3 Installation. Outside Switzerland, each visit is quoted.

Repair: in our workshop near Zurich, see 8.1 Repair and RMA.

Labels and ribbons: from us too, chosen by what the label must survive, see the .
For the Alpha-40L on its own or with its installation, labels and ribbons, request a quote.
Last checked: 5 November 2026.
Preparing a validation, an inspection or a change to your labels?
The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.




