Zebra RS6100
A Bluetooth ring scanner worn on a finger or the back of the hand, reading 100 mil Code 39 to 14.07 m, sealed to IP65, for 1.8 m drops.

far reading limit, 100 mil Code 39
sealing rating
drops to concrete over the operating temperature range
weight with the 1x battery
Specification
The base model. Options change some of these figures.
Reading
- Sensor
- 2688 x 1520 pixels; SE55 1D/2D advanced range scan engine with IntelliFocus technology
- Field of view
- 37° horizontal by 21.4° vertical
- Aimer and light
- 515 nm laser aimer; one warm white LED
- Angles
- Roll 360°; pitch ±60°; skew ±60°
- Ambient light
- Up to 107,639 lux, direct sunlight
- Reading range, typical
- 3 mil Code 39: 6.9 to 41.1 cm; 5 mil Code 39: 6.4 to 67.6 cm; 5 mil PDF417: 7.1 to 49.8 cm; 6.7 mil PDF417: 6.6 to 65.0 cm; 10 mil Data Matrix: 5.6 to 68.8 cm; 13 mil UPC: 6.4 to 180 cm; 15 mil Code 128: 18.2 to 182.9 cm; 20 mil Code 39: up to 276.9 cm; 55 mil Code 39: up to 744.2 cm; 100 mil Code 39: up to 1,407.2 cm; 100 mil Data Matrix: up to 685.8 cm
Codes
- 1D
- Code 39, Code 128, Code 93, Codabar/NW7, Code 11, MSI, UPC/EAN, Interleaved 2 of 5, Korean 3 of 5, GS1 DataBar, Base 32 (Italian Pharma)
- 2D
- PDF417, Micro PDF417, Composite Codes, TLC-39, Aztec, Data Matrix, MaxiCode, QR Code, Micro QR, Han Xin, Postal Codes
- OCR
- OCR-A, OCR-B
Connections
- Bluetooth
- Bluetooth 5.2 with BLE, Class 1 and 2; Serial Port, Human Interface Device and Service Discovery Application profiles
- Pairing
- NFC tap to pair
- Hosts
- Zebra handheld, tablet, wearable and vehicle mount mobile computers, or any Bluetooth smartphone, tablet or PC
- Corded power
- Corded adapters power it from the WT6000, WT6300, TC21, TC26, TC53 and TC58
Battery
- Battery
- PowerPrecision+ Li-ion pack: 480 mAh standard; 735 mAh extended
Unit
- Size
- 66.6 x 32.7 x 21 mm, length by width by depth
- Weight
- 70 g with the 1x battery; 76 g with the 1.5x battery
- Trigger
- Manual ambidextrous trigger
- Indicators
- Four programmable RGB LEDs on the back; beeper up to 85 dBA at 10 cm from the back of the device
- Restore key
- User accessible, for an emergency warm boot and a Bluetooth reconnect
Environment
- Operating
- 0 to 50 °C with the standard battery; −30 to 50 °C with the extended battery; 5 to 95% humidity, non-condensing
- Storage
- −40 to 60 °C including the battery; −40 to 70 °C without it
- Drops
- Multiple drops from 1.8 m to concrete over the operating temperature range
- Tumbles
- 1,000 tumbles of 0.5 m
- Sealing
- IP65, to IEC 60529
Options
Wearing styles Five interchangeable mounts: a hand mount in sizes for right and left hands, a single finger mount with a single or a double trigger, a back of hand mount, and a retracting lanyard trigger.
Vibrating trigger An optional trigger that signals an error or exception.
Batteries A standard 480 mAh or an extended 735 mAh PowerPrecision+ pack, removable; the extended pack carries the rating down to −30 °C.
Corded adapter Powers the scanner from select Zebra mobile computers, so that it needs no battery.
ShareCradle A high capacity ShareCradle charges 20 RS6100 scanners or 40 batteries.
Drivers and documents
- From Zebra: the software, manuals and documents are on Zebra's page for the RS6100.
- Set up as a fleet: 123Scan, Scanner Management Service.
- Into your systems: how a scan reaches your ERP or warehouse system is on 3.5 Barcode and data capture.
Warranty
Zebra's warranty on the RS6100: 12 months from Zebra's ship date or the purchase date, whichever is later.
Successor
The RS6100 is current: Zebra has announced no end of sale.
It replaced the RS6000. Older models and their successors are on 5.6 Discontinued models.
Around the device

Set-up: we set up the device and the data it sends, see 3.5 Barcode and data capture. Outside Switzerland, each visit is quoted.

Remote support: a fault in the connection to your system can be fixed without anybody travelling, see 8.5 Remote support.

Choosing one: what to compare between scanners and mobile computers is on 5.3 Scanners and mobile computers.
For the RS6100 on its own or with its set-up and the connection to your systems, request a quote.
Last checked: 5 November 2026.
Preparing a validation, an inspection or a change to your labels?
The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.




