Zebra DS2200 Series
A corded or cordless 1D and 2D handheld imager with a 640 x 480 sensor, sealed to IP52 and designed to withstand drops from 1.5 m onto concrete.

far reading limit, 13 mil UPC
sealing rating
drops to concrete
image sensor
Specification
The base model. Options change some of these figures.
Reading
- Sensor
- 640 x 480 pixels
- Field of view
- 32.8° horizontal by 24.8° vertical, nominal
- Aimer and light
- Linear 624 nm amber LED aimer; two 645 nm super red LEDs
- Minimum print contrast
- 25% reflective difference
- Skew, pitch, roll
- ±65°, ±65°, 0 to 360°
- Motion tolerance
- Up to 13 cm per second handheld; up to 76.2 cm per second hands-free; for 13 mil UPC
- Smallest element
- Code 39 and Code 128 4.0 mil; Data Matrix 6.0 mil; QR Code 6.7 mil
- Reading range, typical
- UPC 13 mil: 1.27 to 36.8 cm; Code 39 5 mil: 0.5 to 15.2 cm; Code 128 5 mil: 1.5 to 10.1 cm; PDF417 6.7 mil: 2.0 to 14.5 cm; Data Matrix 10 mil: 0.8 to 15.7 cm; QR Code 20 mil: 0 to 27.9 cm
Codes
- 1D
- Code 39, Code 128, Code 93, Codabar/NW7, Code 11, MSI Plessey, UPC/EAN, Interleaved 2 of 5, Korean 3 of 5, GS1 DataBar, Base 32 (Italian Pharma)
- 2D
- PDF417, Composite Codes, TLC-39, Aztec, Data Matrix, MaxiCode, QR Code, Micro QR, Han Xin, Postal Codes
Connections
- Host interfaces
- USB, RS232, keyboard wedge, TGCS (IBM) 46XX over RS485
- Keyboards
- More than 90 international keyboards
- Bluetooth, DS2278
- Bluetooth 4.0 with BLE, Serial Port and HID profiles; Class 2, 10 m minimum and up to 100 m when paired with the CR2278 cradle
Battery, DS2278
- Battery
- 2,400 mAh Li-Ion
- Scans per charge
- 110,000 at 60 scans per minute; 50,000 at 10 scans per minute
- Operating time
- 84 hours per full charge
- Test profile
- 10 scans in 10 seconds, then a 50 second rest
Unit
- Size, DS2208
- 165 x 66 x 99 mm, height by width by depth
- Size, DS2278
- 175 x 66 x 90 mm, height by width by depth
- Size, presentation cradle
- 72 x 94 x 122 mm, height by width by depth
- Weight
- DS2208 161.6 g; DS2278 214 g; presentation cradle 151 g
- Power
- 4.5 to 5.5 V DC, host powered or from an external power supply
- Current, DS2208
- 250 mA operating, 150 mA standby, typical at 5.0 V
- Colours
- Nova White, Twilight Black
- Indicators
- Direct decode indicator, good decode LEDs, rear view LEDs, beeper with adjustable tone and volume
Environment
- Operating
- 0 to 50 °C for the imagers; 0 to 40 °C for the presentation cradle; 5 to 95% humidity, non-condensing
- Storage
- −40 to 70 °C
- Drops
- Multiple drops from 1.5 m to concrete
- Tumbles
- 250 tumbles in a 0.5 m tumbler; one tumble is half a cycle
- Sealing
- IP52
- Ambient light
- 0 to 107,600 lux
Options
Presentation cradle The CR2278 holds the DS2278 for hands-free scanning and charges its battery; the scanner switches to hands-free mode when it stands in the cradle.
Spare battery A spare battery for the cordless DS2278, which has a 2,400 mAh Li-Ion battery as standard.
Micro USB cable Charges the DS2278 without the cradle.
Drivers and documents
- From Zebra: the software, manuals and documents are on Zebra's page for the DS2200 Series.
- Set up as a fleet: 123Scan, Scanner Management Service.
- Into your systems: how a scan reaches your ERP or warehouse system is on 3.5 Barcode and data capture.
Warranty
Zebra's warranty on the DS2200 Series: 60 months on the corded DS2208, 36 months on the cordless DS2278 and its CR2278 cradle, and 12 months on the battery.
Successor
The DS2200 Series is current: Zebra has announced no end of sale.
It replaced the DS4800. Older models and their successors are on 5.6 Discontinued models.
Around the device

Set-up: we set up the device and the data it sends, see 3.5 Barcode and data capture. Outside Switzerland, each visit is quoted.

Remote support: a fault in the connection to your system can be fixed without anybody travelling, see 8.5 Remote support.

Choosing one: what to compare between scanners and mobile computers is on 5.3 Scanners and mobile computers.
For the DS2200 Series on its own or with its set-up and the connection to your systems, request a quote.
Last checked: 5 November 2026.
Preparing a validation, an inspection or a change to your labels?
The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.




