Zebra FS42
A fixed scanner for conveyor and dock lines with a 2.3 MP or 5 MP sensor, reading 1D, 2D and direct part marks, in an IP65 and IP67 housing.

highest sensor resolution, 2.3 MP also offered
sealing ratings
shock resistance, 11 ms, to EN 60068-2-27
acquisition rate at 2.3 MP
Specification
The base model. Options change some of these figures.
Reading
- Sensor, 2.3 MP
- 1/2.6 inch CMOS, global shutter, 1920 x 1200 pixels, 3.0 µm square pixels, monochrome
- Sensor, 5 MP
- 1/2.5 inch CMOS, global shutter, 2592 x 1944 pixels, 2.2 µm square pixels, monochrome
- Acquisition rate
- 2.3 MP up to 60 frames per second; 5 MP up to 42 frames per second
- Lens and field of view
- Standard range, 10.8 mm liquid lens: 30° horizontal by 19° vertical; wide angle, 6.8 mm liquid lens: 46° horizontal by 29° vertical; nominal
- Aimer
- Red Class II laser, 8-point sunburst pattern
- Illumination
- Field replaceable modules: eight 660 nm red LEDs, or eight 850 nm infrared LEDs, or eight 2700 K white LEDs, or four red, eight infrared and eight white LEDs together
- Processor and memory
- Quad core processor with a neural processing unit; 8 GB memory
Codes
- 1D
- Codabar, Code 39, Code 93, Code 128, Interleaved 2 of 5, MSI Plessey, UPC/EAN
- 2D
- Aztec, Data Matrix, DotCode, MaxiCode, PDF417, Micro PDF417, QR Code, Micro QR
- Direct part marks
- 1D and 2D, with the 1D/2D DPM Full decoder package
- OCR
- Deep learning based OCR by add-on licence; Latin letters, digits and listed symbols
- Decoder packages
- 1D/2D Fast, 60 frames per second; 1D/2D DPM Full, 60 frames per second; Connectivity Gateway Solution Licence
Connections
- Ethernet
- One M12 X-coded 10/100/1000 Mbps port; PoE on the primary port only
- Protocols
- EtherNet/IP, PROFINET, Modbus TCP, TCP/IP, RS-232
- Ports
- One M12 12-pin power, GPIO and RS-232 port; one M12 5-pin external light power and control port with GPIO; one USB 3.0 SuperSpeed Type-C with DisplayPort Alt Mode
- Inputs and outputs
- Four opto-isolated GPIO and five non-isolated GPIO, 10 to 30 V DC; GPIO 6 to 8 are unavailable when External Light Mode is on
- Keyboard
- USB HID
Unit
- Size
- 54.0 x 64.0 x 91.4 mm, height by width by depth
- Weight
- 400 g
- Power
- External supply 10 to 30 V DC, 1.5 A max at 24 V DC (36 W max); PoE class 3, 13 W max; PoE+ class 4, 25.5 W max; USB-C host 5 V DC, 3 A max (15 W max)
- Housing
- Industrial green aluminium
- Indicators
- 360° decode and job status LEDs; power, device status, focus status, warning and Ethernet status LEDs; beeper with adjustable volume
Environment
- Operating
- 0 to 45 °C on a 10 to 30 V DC supply; 0 to 40 °C on PoE; both depend on the duty cycle
- Storage
- −40 to 70 °C
- Humidity
- 5 to 90%, non-condensing
- Sealing
- IP65 and IP67
- Shock
- EN 60068-2-27, 30 g, 11 ms, 3 shocks on each axis
- Vibration
- EN 60068-2-6, 14 mm at 2 to 10 Hz, 1.5 mm at 13 to 55 Hz, 2 g at 70 to 500 Hz, 2 hours on each axis
Software
- Management
- Zebra Aurora Focus
- Machine vision toolsets
- Sensor and Standard, by upgrade licence
Options
Sensor and lens A 2.3 MP or 5 MP sensor, with a standard range lens (10.8 mm) or a wide angle lens (6.8 mm).
Illumination modules Field replaceable red, infrared or white modules, or one module with all three.
ZIML light The Zebra Integrated Multifunction Light, in white, red or infrared, with ten times the standard light output in DualOverDrive mode, strobe control from the camera trigger and dual dot lasers.
Deep learning OCR Reads text without font training: draw a box around the text to read. Added by licence.
Direct part marks The 1D/2D DPM Full decoder package reads 1D and 2D direct part marks.
Machine vision toolsets An upgrade licence turns the scanner into a smart camera with machine vision tools, such as image anomaly detection.
Accessories Zebra lists internal and external illumination, internal filters, brackets, cables and power supplies.
Drivers and documents
- From Zebra: the software, manuals and documents are on Zebra's page for the FS42.
- Set up as a fleet: Zebra Aurora Focus.
- Into your systems: how a scan reaches your ERP or warehouse system is on 3.5 Barcode and data capture.
Warranty
Zebra's warranty on the FS42: 24 months.
Status
The FS42 is current: Zebra has announced no end of sale.
Older models and their successors are on 5.6 Discontinued models.
Around the device

Set-up: we set up the device and the data it sends, see 3.5 Barcode and data capture. Outside Switzerland, each visit is quoted.

Remote support: a fault in the connection to your system can be fixed without anybody travelling, see 8.5 Remote support.

Choosing one: what to compare between scanners and mobile computers is on 5.3 Scanners and mobile computers.
For the FS42 on its own or with its set-up and the connection to your systems, request a quote.
Last checked: 5 November 2026.
Preparing a validation, an inspection or a change to your labels?
The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.




