Honeywell PX940
A 4 inch industrial label printer for thermal transfer and direct thermal labels, up to 350 mm per second and 600 dpi, also as a barcode-verifying version.

maximum print width, at 203 dpi
maximum print speed, at 203 dpi
highest resolution
print registration, plus or minus
What fits the PX940
Drawn to one scale.
Labels: 20 to 114 mm wide including the liner; 0.076 to 0.254 mm thick; on rolls up to 212.7 mm across, on a 76 mm or 38 mm core.
Ribbons: 51 to 110 mm wide and about 450 m long on rolls up to 80 mm across, on a 25 mm core, wound ink side in or out.
See , , or start from what the label must survive in the .
Specification
The base model. Options change some of these figures.
Printing
- Methods
- Thermal transfer and direct thermal
- Resolution
- 203 dpi (8 dots/mm); 300 dpi (11.8 dots/mm); 600 dpi (23.6 dots/mm)
- Print width
- 108 mm at 203 dpi; 105.7 mm at 300 dpi; 105.6 mm at 600 dpi
- Print speed
- 50 to 350 mm/s at 203 dpi; 50 to 300 mm/s at 300 dpi; 25 to 150 mm/s at 600 dpi
- Print length
- Up to 4.8 m at 203 dpi; 2.2 m at 300 dpi; 0.55 m at 600 dpi
- Print registration
- ±0.2 mm; dual label stop sensor
- Verifier (PX940V only)
- Scans at 600 dpi, up to 108 mm wide, with a 660 nm light source; verifies at up to 250 mm/s at 203 and 300 dpi and 150 mm/s at 600 dpi
- Verification grades
- 1D barcodes to ISO/IEC 15416-2016 and 2D barcodes to ISO/IEC 15415-2011, or read and no read; pass or fail with ANSI grades 0.0 (F) to 4.0 (A); labels below a set threshold voided and reprinted
- Verifier codes
- 1D: Code 39, HIBC 39, Code 93, Code 128, ISBT 128, HIBC 128, EAN-128, GS1-128, EAN-8, EAN-13, UPC-A, UPC-E, Interleaved 2 of 5, ITF-14, SCC-14, RSS14E, GS1 DataBar Expanded; 2D: Data Matrix, ISBT Data Matrix, QR code
- Verifier limits
- Smallest 1D bar and 2D cell 10 mil (0.254 mm); up to 32 barcodes per label; label length up to 304.8 mm; voiding length up to 152.4 mm in batch print and 304.8 mm on demand; media opacity at least 80%; ambient light up to 5,000 lux
- Verification reports
- Printer web page, USB drive, Verifier Integration Interface (VII), FTP or SFTP
Labels
- Width
- 20 to 114 mm, label and liner
- Length
- Minimum 3.0 mm tear-off; 12.7 mm self-strip; 6.0 mm rewind
- Roll
- Up to 212.7 mm outside diameter, on a 76 mm or 38 mm core; roll-fed (wound out only) or fan-fold
- Thickness
- 0.076 to 0.254 mm
- Types
- Gap, black mark, tag, hole, notch or continuous
Ribbons
- Width
- 51 to 110 mm
- Length
- About 450 m, on rolls up to 80 mm across
- Core
- 25 mm
- Types
- Wax, mid-range and resin; wound ink side in or out
Connections
- Standard
- USB 2.0 host (two) and device; Ethernet 10/100 Mbit/s; RS-232 up to 115.2 kbit/s; Bluetooth LE for PrintSet MC only; static NFC tag with the Bluetooth MAC address
- Optional
- Wi-Fi IEEE 802.11 a/b/g/n/ac; parallel IEEE 1284; applicator interface; industrial interface
Printer languages
- Fingerprint (FP), Direct Protocol (DP), Intermec Printer Language (IPL, on 203 and 300 dpi only), ZSim2 (ZPL-II), DPL, XML-enabled for SAP AII and Oracle WMS; C# smart printing, with barcode verification off while running C#
Unit
- Size
- 506 x 398.7 x 261 mm, length by height by width
- Weight
- PX940: 23 kg; PX940 verifier version: 23.5 kg
- Display
- 3.5 inch colour touch LCD
- Memory
- 256 MB flash, 1 GB DDR3 SDRAM
- Processor
- Dual core ARM Cortex A9
- Power
- 100 to 240 V AC, 50 to 60 Hz; 200 W power supply with power factor correction
Environment
- Operating
- 5 to 40 °C; 20 to 85% humidity, non-condensing
- Storage
- PX940: −20 to 70 °C; PX940 verifier version: −20 to 60 °C
Options
Peel-off module A peel-off module, configured at the factory.
Rewinder A rewinder module, configured at the factory.
38 mm cores A non-collapsible 38 mm inner core diameter on the media supply and the rewinder take-up, configured at the factory.
Wi-Fi A field-installable wireless board for IEEE 802.11 a/b/g/n/ac, with kits for North America and for the European Union.
Applicator interface An applicator interface board.
Parallel interface A parallel IEEE 1284 interface board.
Industrial interface A UART and industrial interface card, which can take RS-232, RS-422 and RS-485 circuits.
Verifier calibration card A calibration card for the verifier, for the PX940V only.
Drivers and documents
- From Honeywell: the drivers, firmware and user guide are on Honeywell's page for the PX940.
- Set up as a fleet: PrintSet 5, Honeywell Printer Edge.
- From SAP: through TEKLYNX SENTINEL, see 3.1 SAP label printing.
- From label software: through Honeywell's driver, see Software licences.
Printheads and wear parts
Part-number search| Part | Honeywell part number |
|---|---|
| Printhead kit, 203 dpi (listed as 200 dpi; number on the printhead label 50141445-001) | 50151886-001 |
| Printhead kit, 300 dpi (number on the printhead label 50141446-001) | 50151887-001 |
| Printhead kit, 600 dpi (number on the printhead label 50141447-001) | 50151888-001 |
| Platen roller kit | 50151881-001 |
| Printhead cleaning card, box of 25 | 1-110501-00 |
| Verifier calibration card, PX940V | 50144663-001 |
The numbers are from Honeywell PX940 Series Industrial Printers Accessories Guide of January 2020 (Rev A). We supply these parts, and compatible ones, under our own article numbers.
What wears, and what shortens its life: 5.5 Printheads and wear parts.
Honeywell's standard warranty in Europe is 1 year on the printer, 1 year or 1 million inches (25.4 km) of printing on printheads, whichever comes first, and 90 days on spare parts and accessories.
Successor
The PX940 is current: Honeywell has announced no end of sale.
It replaced the H-Class. Older models and their successors are on 5.6 Discontinued models.
Around the printer

Installation: installed and commissioned by us, see 8.3 Installation. Outside Switzerland, each visit is quoted.

Repair: in our workshop near Zurich, see 8.1 Repair and RMA.

Labels and ribbons: from us too, chosen by what the label must survive, see the .
For the PX940 on its own or with its installation, labels and ribbons, request a quote.
Last checked: 5 November 2026.
Preparing a validation, an inspection or a change to your labels?
The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.




