Honeywell PX45
A 4 inch industrial label printer for thermal transfer and direct thermal labels, at up to 300 mm per second and up to 406 dpi, in an all-metal housing.

maximum print width, direct thermal
maximum print speed, at 203 and 300 dpi
highest resolution
largest label roll diameter
What fits the PX45
Drawn to one scale.
Labels: 25.4 to 120 mm wide; 0.061 to 0.254 mm thick; on rolls up to 213 mm across, on a 38 to 76 mm core.
Ribbons: 450 m long on rolls up to 80 mm across, wax, mid-range or resin; Honeywell's datasheet gives no ribbon width or core size.
See , , or start from what the label must survive in the .
Specification
The base model. Options change some of these figures.
Printing
- Methods
- Thermal transfer and direct thermal
- Resolution
- 203 dpi (8 dots/mm); 300 dpi (11.8 dots/mm); 406 dpi (16 dots/mm)
- Print width
- 112 mm for direct thermal; 110 mm for thermal transfer
- Print speed
- 100 to 300 mm/s at 203 and 300 dpi; 100 to 250 mm/s at 406 dpi
- Media sensors
- Gap, notch, black mark, continuous, media low and media end; label taken, ribbon low and end, head lift
Labels
- Width
- 25.4 to 120 mm
- Roll
- Up to 213 mm outside diameter, on a 38 to 76 mm core; roll-fed or fan-fold
- Thickness
- 0.061 to 0.254 mm
- Types
- Labels, tags and linered media
Ribbons
- Length
- 450 m, on rolls up to 80 mm across
- Types
- Wax, mid-range and resin
Connections
- Standard
- Ethernet 10/100 Mbit/s; USB 2.0 host, high speed; USB 2.0 device, high speed; RS-232 up to 115.2 kbit/s
- Optional
- Parallel IEEE 1284; industrial interface; dual serial ports; applicator interface; UHF RFID; Wi-Fi IEEE 802.11 a/b/g/n/ac
- Network protocols
- TCP/IP suite (TCP, UDP, ICMP, IGMP), LPR/LPD, Telnet/SSH, FTP/SFTP, BOOTP, DHCP, HTTP/HTTPS, SNMPv1/2c/3, SMTP; IPv4 and IPv6
Printer languages
- Fingerprint (FP), Direct Protocol (DP), Intermec Printer Language (IPL), ZSim2 (ZPL-II), DPL, XML-enabled for SAP AII and Oracle WMS, PDF, C#
Unit
- Size
- 482 x 238 x 275 mm, length by height by width
- Weight
- 12.61 kg
- Memory
- 512 MB flash, 256 MB SDRAM; 256 MB user partition
- Power
- 90 to 265 V AC, 45 to 65 Hz; standby 5 W; peak 400 W
Environment
- Operating
- 5 to 40 °C; 10 to 90% humidity, non-condensing
- Storage
- −20 to 70 °C; 10 to 90% humidity, non-condensing
Options
UHF RFID A kit for EPC Gen 2 V2.1 with an 865 to 928 MHz radio set to local UHF rules, including FCC and ETSI; kits for 915 MHz and 869 MHz are listed, and availability depends on the region.
Cutter A cutter module for continuous non-adhesive paper or the backing paper between labels, fitted at the factory or as an upgrade kit; it cannot be fitted with a label taken sensor, and the shortest cut length is 38.1 mm.
Applicator interface An applicator interface board, supported for the Direct Protocol and Fingerprint printer languages.
Wi-Fi An 802.11 radio interface kit.
Parallel interface A parallel IEEE 1284 interface board.
Industrial interface An industrial interface board with 8 digital in/out, 4 analog relays and one RS-232/422/485 port, not applicable when using IPL firmware.
Dual serial ports An additional serial interface board for RS-232, RS-422, RS-485 and 20 mA current loop, not applicable when using IPL firmware.
Media supply hub A media supply hub.
Drivers and documents
- From Honeywell: the drivers, firmware and user guide are on Honeywell's page for the PX45.
- Set up as a fleet: PrintSet 5, Honeywell Printer Edge.
- From SAP: through TEKLYNX SENTINEL, see 3.1 SAP label printing.
- From label software: through Honeywell's driver, see Software licences.
Printheads and wear parts
We supply printheads and wear parts for the printers we sell, the printer maker's own and compatible ones. Send us the model and, if you have it, the serial number at [email protected], and we name the part.
What wears, and what shortens its life: 5.5 Printheads and wear parts.
Honeywell's standard warranty in Europe is 1 year on the printer, 1 year or 1 million inches (25.4 km) of printing on printheads, whichever comes first, and 90 days on spare parts and accessories.
Successor
The PX45 is current: Honeywell has announced no end of sale.
It replaced the PX4C. Older models and their successors are on 5.6 Discontinued models.
Around the printer

Installation: installed and commissioned by us, see 8.3 Installation. Outside Switzerland, each visit is quoted.

Repair: in our workshop near Zurich, see 8.1 Repair and RMA.

Labels and ribbons: from us too, chosen by what the label must survive, see the .
For the PX45 on its own or with its installation, labels and ribbons, request a quote.
Last checked: 5 November 2026.
Preparing a validation, an inspection or a change to your labels?
The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.




