Numaco Labeling
 
Numaco Labeling
Zebra

Zebra ZT411

A 4 inch industrial label printer for thermal transfer and direct thermal labels, at up to 356 mm per second and up to 600 dpi.

Last checked: 21 October 2026.
Zebra ZT411, industrial printer
Photo: Zebra.
104 mm

maximum print width

356 mm/s

maximum print speed

600 dpi

highest resolution, as an option

4.3 inch

colour touch display

What fits the ZT411

203 mm 76 mm core Label roll
114 mm 104 mm printed Labels
110 mm 25 mm core 450 m Ribbon

Labels: 25.4 to 114 mm wide with tear-off or cutter, up to 108 mm with peel or rewind; 0.058 to 0.25 mm thick; on rolls up to 203 mm across, on a 76 mm core.

Ribbons: 51 to 110 mm wide and 450 m long, on a 25 mm core. Zebra recommends a ribbon at least as wide as the label, to protect the printhead. A ribbon coated on the inside needs the ink-side-in supply spindle.

The roll, the labels and the ribbon drawn to one scale.

Specification

The base model. Options change some of these figures.

Printing

Methods
Thermal transfer and direct thermal
Resolution
203 dpi; 300 and 600 dpi optional
Print width
Up to 104 mm
Print speed
Up to 356 mm/s
Print length
Up to 3,988 mm at 203 dpi, 1,854 mm at 300 dpi, 991 mm at 600 dpi
Media sensors
Transmissive and reflective

Labels

Width
25.4 to 114 mm with tear-off or cutter; 25.4 to 108 mm with peel or rewind
Roll
Up to 203 mm outside diameter, on a 76 mm core
Thickness
0.058 to 0.25 mm
Types
Continuous, die-cut, notched, black mark

Ribbons

Length
450 m
Width
51 to 110 mm
Core
25 mm

Connections

Standard
USB 2.0, RS-232 serial, 10/100 Ethernet, Bluetooth 4.1, two USB host ports
Optional
Dual band Wi-Fi 6 with Bluetooth 5.3, or Wi-Fi 802.11ac with Bluetooth 4.2; parallel; a second Ethernet port; applicator interface

Printer languages

ZPL and ZPL II; EPL on 203 dpi models only; ZBI 2.0 optional

Unit

Memory
256 MB SDRAM, 512 MB flash
Size
495 x 269 x 324 mm, length by width by height
Weight
16.33 kg
Power
100 to 240 V AC, 50 to 60 Hz

Environment

Operating
5 to 40 °C for thermal transfer, 0 to 40 °C for direct thermal; 20 to 85% humidity, non-condensing
Storage
−40 to 60 °C

Options

Cutter: front-mounted guillotine cutter with a catch tray.

Peeler: front-mounted passive peel, with an optional full-roll liner take-up.

Rewinder: rewinds a full roll of printed labels on a 76 mm core, or peels and rewinds the liner. Fitted in the factory only.

RFID: encodes UHF tags to EPC Gen 2 V2.1, ISO/IEC 18000-63 and RAIN RFID, and can be fitted later. An on-metal version prints the thicker RFID labels made for metal containers and assets, at 203 or 300 dpi.

Linerless: a factory-built direct thermal model, or a kit for an existing ZT411.

Applicator kit: extended peel, captured media spindle and applicator interface card, for automatic labelling lines, see 5.2 Applicators.

Small cores: a hanger for label rolls on a 25 mm core.

Drivers and documents

  • From Zebra: the drivers, firmware and user guide are on Zebra's support page for the ZT411.
  • From SAP: directly through SAP's device types for Zebra printers, or through TEKLYNX SENTINEL, see 3.1 SAP label printing.
  • From label software: through Zebra's driver or the software's own, see Software licences.
  • Calibration: PrinterCal, our own software, sets media sensor, darkness and print position on Zebra printers.

Printheads and wear parts

Part-number search
PartZebra part number
Printhead, 203 dpiP1058930-009
Printhead, 300 dpiP1058930-010
Printhead, 600 dpiP1058930-011
Printhead for on-metal RFID labels, 203 dpiP1105147-300
Printhead for on-metal RFID labels, 300 dpiP1105147-301
Platen rollerP1058930-080
Platen roller, linerless modelP1105147-701
Tear bar79837M
Drive belt, 203 dpi79866M
Drive belt, 300 and 600 dpi79867M
Peel roller77197M
Kit to change the resolution to 203, 300 or 600 dpiP1058930-023, P1058930-022, P1058930-024

The numbers are from Zebra's ZT411 and ZT421 parts catalogue of 4 March 2026. We supply these parts, and compatible ones, under our own article numbers.

The printhead and platen roller change without tools. Zebra's schedule has them cleaned after every roll of ribbon, or after every roll of labels when printing direct thermal. What wears, and what shortens its life: 5.5 Printheads and wear parts.

Printhead Platen roller Tear bar Peel roller Ribbon Labels

Zebra's warranty in Europe: 24 months on the printer, 12 months on the cutter and the wear parts such as the platen roller, and 1 year or 1 million inches (25.4 km) of printing on the printhead, whichever comes first.

An operator in a warehouse takes a shipping label from a Zebra ZT411

Successor

The ZT411 is current: Zebra has announced no end of sale.

It replaced the ZT410 and the ZM400; the 6 inch ZT421 replaced the ZT420 and the ZM600. Older models and their successors are on 5.6 Discontinued models.

Around the printer

Roller conveyors running through a warehouse

Installation: installed and commissioned by us, see 8.3 Installation. Outside Switzerland, each visit is quoted.

A technician with a screwdriver at the circuit board of an opened device

Repair: in our workshop near Zurich, see 8.1 Repair and RMA.

Pink tablets in a pharmaceutical production machine

In a GMP plant: IQ and OQ support for Zebra printers, see 1.4 IQ/OQ/PQ scope.

For the ZT411 on its own or with its installation, labels and ribbons, request a quote.

Last checked: 21 October 2026.

Talk to us

Preparing a validation, an inspection or a change to your labels?

The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.