Zebra ZE511
A 4 inch print engine for print and apply systems, in right-hand and left-hand versions, at up to 457 mm per second and up to 600 dpi.

maximum print width
maximum print speed, direct thermal at 203 dpi
highest resolution, as an option
colour touch screen
What fits the ZE511
Drawn to one scale.
Labels: 16 to 114 mm wide; 0.135 to 0.254 mm thick.
Ribbons: 25.4 to 107 mm wide and up to 600 m long, on a 25.4 mm core, coated side out or in.
See , , or start from what the label must survive in the .
Specification
The base model. Options change some of these figures.
Printing
- Methods
- Thermal transfer and direct thermal
- Orientation
- Right-hand or left-hand
- Resolution
- 203 dpi; 300 and 600 dpi optional
- Print width
- Up to 104 mm
- Print speed
- Up to 457 mm/s at 203 dpi direct thermal with the optional high-speed printhead; 356 mm/s at 203 dpi thermal transfer and at 300 dpi; 152 mm/s at 600 dpi
- Print length
- Up to 3,801 mm at 203 dpi, 2,540 mm at 300 dpi, 1,270 mm at 600 dpi, on continuous media
- Media sensors
- Adjustable transmissive and fixed reflective
Labels
- Width
- 16 to 114 mm
- Length
- From 6.4 mm; from 12.7 mm in applicator and tear-off modes with backfeed on
- Thickness
- 0.135 to 0.254 mm
- Types
- Continuous, die-cut, black mark
Ribbons
- Length
- Up to 600 m
- Width
- 25.4 to 107 mm
- Core
- 25.4 mm; rolls up to 101.6 mm outside diameter; coated side out or in
Connections
- Standard
- USB 2.0, RS-232 serial, 10/100 Ethernet, Bluetooth 4.1, two USB host ports, applicator interface
- Optional
- In one open slot: parallel port card, dual band 802.11ac Wi-Fi with Bluetooth card, or a second 10/100 Ethernet card
Printer languages
- ZPL and ZPL II; PDF Direct; ZBI 2.0 optional
Unit
- Display
- 4.3 inch colour touch screen, rotatable, mountable up to 2 m from the print engine
- Memory
- 512 MB SDRAM, 512 MB flash
- Size
- 379 x 245 x 300 mm, depth by width by height
- Weight
- 15.4 kg
- Power
- 90 to 264 V AC, 47 to 63 Hz
Environment
- Operating
- 0 to 40 °C; 20 to 95% humidity, non-condensing
- Storage
- −40 to 71 °C; 5 to 95% humidity, non-condensing
Options
RFID A field-installable UHF kit for 4 inch and 6 inch print widths that prints and encodes tags to EPC Gen 2 V2, ISO/IEC 18000-63 and RAIN RFID, with a smallest tag pitch of 16 mm.
Communication card The open internal slot takes a parallel port card, a dual band 802.11ac Wi-Fi and Bluetooth card or a second 10/100 Ethernet card.
Extended peel bar A kit with an extended length peel bar.
Screen extension kit A user interface extension and mounting kit that lets the touch screen sit up to 2 m from the print engine.
High-speed printhead An optional printhead for 203 dpi printing faster than 356 mm/s, up to 457 mm/s in direct thermal mode; ZE511 only.
ZBI 2.0 Zebra's programming language, which lets the engine run stand-alone applications and connect to peripherals.
Drivers and documents
- From Zebra: the drivers, firmware and user guide are on Zebra's page for the ZE511.
- Set up as a fleet: ZebraDesigner Essentials, Zebra Printer Setup Utilities.
- From SAP: directly through SAP's device types for Zebra printers, or through TEKLYNX SENTINEL, see 3.1 SAP label printing.
- From label software: through Zebra's driver, see Software licences.
- Calibration: PrinterCal, our own software, sets media sensor, darkness and print position on Zebra printers.
Printheads and wear parts
Part-number search| Part | Zebra part number |
|---|---|
| Printhead, 203 dpi | P1112750-009 |
| Printhead, 300 dpi | P1112750-010 |
| Printhead, 600 dpi | P1112750-011 |
| Optimized rotated barcode printhead, 203 dpi | P1112750-086 |
| Optimized rotated barcode printhead, 300 dpi | P1112750-095 |
| Platen, pinch and peel rollers, set | P1112750-039 |
| Media drive belts, quantity 2 | P1046696-146 |
| Peel bar, standard length | P1046696-074 |
| Kit to change the resolution to 300 dpi | P1112750-014 |
| Kit to change the resolution to 203 dpi | P1112750-015 |
The numbers are from Zebra ZE511 and ZE521 parts catalogue of 2 September 2026. We supply these parts, and compatible ones, under our own article numbers.
What wears, and what shortens its life: 5.5 Printheads and wear parts.
Zebra's warranty in Europe, for printers bought after 1 January 2021: 24 months on the printer, 12 months on the cutter and on wear parts such as platen rollers and belts, and 1 year or 1 million inches (25.4 km) of printing on the printhead, whichever comes first.
Successor
The ZE511 is current: Zebra has announced no end of sale.
It replaced the ZE500. Older models and their successors are on 5.6 Discontinued models.
Around the printer

Installation: installed and commissioned by us, see 8.3 Installation. Outside Switzerland, each visit is quoted.

Repair: in our workshop near Zurich, see 8.1 Repair and RMA.

In a GMP plant: IQ and OQ support for Zebra printers, see 1.4 IQ/OQ/PQ scope.
For the ZE511 on its own or with its installation, labels and ribbons, request a quote.
Last checked: 5 November 2026.
Preparing a validation, an inspection or a change to your labels?
The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.




