Zebra MC9400
A gun-style keypad Android computer with a 4.3 inch screen, Wi-Fi 6E and a hot swap battery, sealed to IP65 and IP68, for 3.65 m drops; the MC9450 adds 5G.

colour touch display, 800 x 480
sealing ratings, with the battery
drops to concrete
battery, with hot swap backup
Specification
The base model. Options change some of these figures.
Screen
- Display
- 4.3 inch WVGA, 800 x 480, colour; 600 nits typical
- Touch panel
- Dual mode capacitive touch with finger, gloved finger or stylus input (conductive stylus sold separately); Corning Gorilla Glass with an air gap (standard model) or optically bonded (freezer model)
- Keypad
- Backlit and field replaceable: 58-key alphanumeric; 53-key alphanumeric standard; 53-key terminal emulation (5250 and VT); 43-key or 34-key numeric and function; 29-key numeric and calculation
- Buttons
- Trigger scan button; keypad scan button
System
- Processor
- Qualcomm 4490 octa-core, 2.4 GHz
- Memory
- 6 GB RAM, 128 GB flash
- Storage slot
- microSD, up to 2 TB
- Operating system
- Android 13, 14 and 15 today; Zebra lists Android 18 as the final version
- Security
- FIPS 140-2 validated; Secure Boot and Verified Boot
Scanning
- Scan engines
- SE58 1D/2D extended range with IntelliFocus technology and a green laser aimer; or SE4770 1D/2D with a red laser aimer
- Range
- SE58: barcodes from in hand to over 30.5 m (100 ft)
- Cameras
- Front 8 MP; rear 16 MP autofocus with an LED flash; torch mode and HDR
- NFC
- ISO 14443 Type A and B; FeliCa and ISO 15693 cards
Connections
- Wi-Fi
- Wi-Fi 6E (802.11ax) and IEEE 802.11 a/b/g/n/ac; tri-band 2.4, 5 and 6 GHz; 2x2 MU-MIMO; up to 286.8 Mbps on 2.4 GHz and 2,402 Mbps on 5 and 6 GHz
- Bluetooth
- Bluetooth 5.3, Class 2; secondary BLE for beaconing within the BLE battery
- Cellular, MC9450 only
- 5G, data only; one nano SIM and one eSIM; private networking (LTE/5G); GPS, GLONASS, Galileo, QZSS
- USB
- USB 2.0 high speed, host and client, on the bottom pogo connector
Battery
- Battery
- Rechargeable Li-Ion 3.6 V, 7,000 mAh (25.2 Wh); BLE battery 7,000 mAh; non-incendive battery 7,000 mAh; freezer battery 5,000 mAh (18.8 Wh)
- Hot swap
- Hot swap battery backup with temporary session persistence
Unit
- Size
- 240 x 88 x 189 mm, length by width by height
- Weight
- 743 g with the battery
- Notifications
- Audible tone; multi-colour LED; haptic feedback
- Audio
- Speaker, microphone, push-to-talk with the internal speaker or a Bluetooth headset
- Sensors
- Light sensor; magnetometer; 3-axis accelerometer with MEMS gyro
Environment
- Operating
- Standard −20 to 50 °C; freezer −30 to 50 °C
- Storage
- −40 to 70 °C
- Humidity
- Standard 5 to 95%, non-condensing; freezer 5 to 95%, condensing, with heaters for the scanner exit window and the touch panel glass
- Sealing
- IP65 and IP68 with the battery
- Drops
- 3.65 m to concrete (MIL-STD-810H); 2.4 m to concrete from −20 to 50 °C; freezer model 2.1 m to concrete from −30 to 50 °C
- Tumbles
- 6,000 tumbles of 1 m
Options
Freezer model A heated touch panel and scanner exit window and a 5,000 mAh freezer battery, rated −30 to 50 °C.
Non-incendive model For Class I, II and III Division 2 areas with flammable gases or materials; Zebra lists it as available in North America.
Keypads Seven keypads, replaced on site without a trip to the service depot.
Scan engines The SE58 extended range engine with a green laser aimer, or the SE4770 engine with a red laser aimer.
BLE battery Works with Device Tracker to find a device that is switched off or low on power; needs the Device Tracker licence.
MC9450 Adds 5G data, one nano SIM and one eSIM, and GPS.
Drivers and documents
- From Zebra: the software, manuals and documents are on Zebra's page for the MC9400.
- Set up as a fleet: StageNow.
- Into your systems: how a scan reaches your ERP or warehouse system is on 3.5 Barcode and data capture.
Warranty
Zebra's warranty on the MC9400 and MC9450: 12 months from Zebra's ship date or the purchase date, whichever is later.
Successor
The MC9400 is current: Zebra has announced no end of sale.
It replaced the MC9300. Older models and their successors are on 5.6 Discontinued models.
Around the device

Set-up: we set up the device and the data it sends, see 3.5 Barcode and data capture. Outside Switzerland, each visit is quoted.

Remote support: a fault in the connection to your system can be fixed without anybody travelling, see 8.5 Remote support.

Choosing one: what to compare between scanners and mobile computers is on 5.3 Scanners and mobile computers.
For the MC9400 on its own or with its set-up and the connection to your systems, request a quote.
Last checked: 5 November 2026.
Preparing a validation, an inspection or a change to your labels?
The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.



