Toshiba B-EP4DL
A 4 inch mobile label printer for direct thermal labels and receipts, at up to 105 mm per second and 203 dpi, running on a lithium ion battery.

maximum print width
maximum print speed
resolution
weight with battery, 0.89 kg on the wireless model
What fits the B-EP4DL
Drawn to one scale.
Labels: Labels on backing paper 50 to 115 mm wide, receipts and coreless media, in outside wound rolls up to 68 mm across on a 12 mm core, or a 25 mm core for linerless media.
Ribbons: none, this printer prints direct thermal.
See , or start from what the label must survive in the .
Specification
The base model. Options change some of these figures.
Printing
- Methods
- Direct thermal
- Resolution
- 203 dpi
- Print width
- Up to 104 mm
- Print speed
- Up to 105 mm/s
- Print length
- Batch: 7 to 995 mm; peel-off: 8 to 58 mm
- Issue modes
- Batch and peel-off
- Media sensors
- Transmissive and reflective
Labels
- Width
- Backing paper 50 to 115 mm, centred
- Roll
- Up to 68 mm outside diameter, outside wound; 12 mm core, or 25 mm for linerless media
- Types
- Labels, receipts, coreless media
Connections
- Standard
- USB 2.0 and IrDA on all models; RS-232C on the GH20, Bluetooth on the GH32, wireless LAN (IEEE 802.11 a/b/g/n) on the GH42
- Optional
- Wireless LAN or Bluetooth interface kit for the RS-232C model
Printer languages
- TPCL, LABEL and RECEIPT modes; ESC/POS; BCI; ZPL II and CPCL emulation (ESC/POS, ZPL II and CPCL not on the GH42)
Drivers
- Windows TPCL driver (2024.2 M-1.E and 7.4.3 M-0); SAP device driver and device types
Unit
- Memory
- 8 MB flash ROM, 16 MB SRAM
- Display
- Backlit LCD, 16 characters by 2 lines; feed and pause keys, status lamp, beeper
- Size
- 150 x 145 x 75 mm, width by depth by height, excluding projecting parts
- Weight
- 0.86 kg with battery (RS-232C and Bluetooth models); 0.89 kg (wireless LAN model)
- Battery
- Lithium ion, 14.8 V, 2,600 mAh; about 100 m of printing per full charge; 300 charge cycles
Environment
- Operating
- −15 to 50 °C (GH20, GH32), 0 to 50 °C (GH42), display 0 to 50 °C; charging 0 to 40 °C; 10 to 90% humidity, non-condensing
- Storage
- −25 to 60 °C; 10 to 90% humidity, non-condensing
- Drop test
- 1.5 m onto six surfaces; a Toshiba design test, not a guarantee for each unit
Options
Battery pack A spare lithium ion battery pack, 14.8 V and 2,600 mAh.
Chargers and adapters A 1-slot battery charger, a 6-slot battery charger, an AC adapter and, except on the wireless LAN model, a DC adapter for 12 V to 48 V.
Shoulder strap A shoulder strap for carrying the printer; a belt clip comes with it.
Linerless label kit A linerless label kit, for linerless media on a 25 mm core.
Wireless interface kit A wireless LAN or Bluetooth interface kit, which adds a wireless link to the RS-232C model.
Drivers and documents
- From Toshiba: the drivers, firmware and user guide are on Toshiba's page for the B-EP4DL.
- Set up as a fleet: BCP Setting Tool.
- From label software: through Toshiba's driver, see Software licences.
Printheads and wear parts
Part-number search| Part | Toshiba part number |
|---|---|
| Battery pack | B-EP804-BT-QM-R |
The numbers are from Toshiba B-EP4DL Owner's Manual, printer specification of Ver0180 (2024). We supply these parts, and compatible ones, under our own article numbers.
What wears, and what shortens its life: 5.5 Printheads and wear parts.
Status
The B-EP4DL is current: Toshiba has announced no end of sale.
Older models and their successors are on 5.6 Discontinued models.
Around the printer

Installation: installed and commissioned by us, see 8.3 Installation. Outside Switzerland, each visit is quoted.

Repair: in our workshop near Zurich, see 8.1 Repair and RMA.

Labels and ribbons: from us too, chosen by what the label must survive, see the .
For the B-EP4DL on its own or with its installation, labels and ribbons, request a quote.
Last checked: 5 November 2026.
Preparing a validation, an inspection or a change to your labels?
The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.




