Honeywell PD45S and PD45
A 4 inch industrial label printer in an all-metal frame, for thermal transfer and direct thermal labels, at up to 250 mm per second (PD45S) and up to 300 dpi.

maximum print width, at 203 dpi
maximum print speed, PD45S at 203 dpi
highest resolution
colour touch display, PD45S0F only
What fits the PD45S and PD45
Drawn to one scale.
Labels: 20 to 114 mm wide including the liner; 0.076 to 0.255 mm thick (PD45S) or 0.076 to 0.224 mm (PD45); on rolls up to 203.2 mm across, on a 76 mm or 25.4 mm core.
Ribbons: 51 to 110 mm wide and about 450 m long on rolls up to 80 mm across, on a 25.4 mm core, wound ink side in or out.
See , , or start from what the label must survive in the .
Specification
The base model. Options change some of these figures.
Printing
- Methods
- Thermal transfer and direct thermal
- Resolution
- 203 dpi (8 dots/mm); 300 dpi (11.8 dots/mm)
- Print width
- Up to 108 mm at 203 dpi; up to 105.7 mm at 300 dpi
- Print speed
- PD45S: 50 to 250 mm/s at 203 dpi, 50 to 200 mm/s at 300 dpi; PD45: 50 to 200 mm/s at 203 dpi, 50 to 100 mm/s at 300 dpi
- Print length
- Up to 4.8 m at 203 dpi; up to 2.2 m at 300 dpi
- Label positioning
- Dual sensor positioning; smallest label 5 mm high; accuracy ±0.5 mm (PD45S) or ±0.75 mm (PD45)
Labels
- Width
- 20 to 114 mm, label and liner
- Length
- Minimum 5 mm tear-off; 12.7 mm self-peel (PD45S); 38 mm with cutter
- Roll
- Up to 203.2 mm outside diameter, on a 76 mm or 25.4 mm core; external roll or fan-fold
- Thickness
- PD45S: 0.076 to 0.255 mm; PD45: 0.076 to 0.224 mm
- Types
- Non-continuous label paper, black mark, tag, guide hole, notch and continuous
Ribbons
- Width
- 51 to 110 mm
- Length
- About 450 m, on rolls up to 80 mm across
- Core
- 25.4 mm
- Types
- Wax, mixed and resin; wound ink side in or out
Connections
- Standard
- USB 2.0 host and device; PD45S, and the PD4500C version of the PD45: Ethernet 10/100 and RS-232 up to 115.2 kbit/s
- Optional
- Wi-Fi IEEE 802.11 a/b/g/n/ac; parallel IEEE 1284, industrial interface and applicator interface (PD45S); dual serial ports
Printer languages
- Fingerprint (FP), Direct Protocol (DP), Intermec Printer Language (IPL), ZSim2 (ZPL-II), DPL; XML-enabled for SAP AII and Oracle WMS; PDF; C# smart printing
Unit
- Size
- 438 x 270 x 249 mm, length by height by width
- Weight
- PD45S0F: 9.34 kg; PD45S0C and PD45: 9.25 kg
- Display
- PD45S0F: 3.5 inch colour touch LCD; PD45S0C and PD4500C: 2.36 inch keyed LCD; PD4500B: LED and Feed button
- Memory
- PD45S: 256 MB flash, 256 MB DDR3 SDRAM; PD45: 128 MB flash
- Processor
- Arm Cortex-A7, 800 MHz
- Power
- 100 to 240 V AC, 50 to 60 Hz; 100 W power supply
Environment
- Operating
- 5 to 40 °C; 20 to 85% humidity, non-condensing
- Storage
- −20 to 70 °C
Options
Peel-off and rewind A peel-off and rewind module, fitted by a service technician (PD45S).
Cutter A cutter fitted by a service technician, for the PD45S and the PD4500C version of the PD45; the shortest label it cuts is 38 mm.
RFID An RFID board that reads and writes RFID media, fitted by a service technician; the PD45SR version carries the RFID antenna in its front sensor.
Wi-Fi module An IEEE 802.11 a/b/g/n/ac module that the customer installs, for the PD45S and the PD4500C version of the PD45.
Applicator interface An applicator interface board, called a labelling machine interface card in the datasheet, fitted by a service technician (PD45S).
Parallel interface A parallel IEEE 1284 interface board, fitted by a service technician (PD45S).
Industrial interface An industrial interface with UART board, giving 8-bit input and output, 4 analog signal relays and one RS-232/422/485 port (PD45S).
Dual serial ports Dual serial ports for RS-232, RS-422, RS-485 and 20 mA current loop, with a GPIO card, for the PD45S and the PD4500C version of the PD45.
Drivers and documents
- From Honeywell: the drivers, firmware and user guide are on Honeywell's page for the PD45S and PD45.
- Set up as a fleet: PrintSet, Honeywell Printer Edge.
- From SAP: through TEKLYNX SENTINEL, see 3.1 SAP label printing.
- From label software: through Honeywell's driver, see Software licences.
Printheads and wear parts
Part-number search| Part | Honeywell part number |
|---|---|
| Printhead kit, 203 dpi (listed as 200DPI), PD45S | 50177476-001 |
| Printhead kit, 300 dpi, PD45S | 50178575-001 |
| Platen roller kit, PD45S | 50178576-001 |
| Printhead kit, 203 dpi (listed as 200DPI), PD45 | 50178577-001 |
| Printhead kit, 300 dpi, PD45 | 50178578-001 |
| Cutter kit, PD45S | 50178579-001 |
The numbers are from Honeywell PD45S/PD45 product page, Part Number list (read 5 November 2026) of 5 November 2026. We supply these parts, and compatible ones, under our own article numbers.
What wears, and what shortens its life: 5.5 Printheads and wear parts.
Honeywell's standard warranty in Europe is 1 year on the printer, 1 year or 1 million inches (25.4 km) of printing on printheads, whichever comes first, and 90 days on spare parts and accessories.
Successor
The PD45S and PD45 are current: Honeywell has announced no end of sale.
It replaced the M-Class, PD41B and PD42B. Older models and their successors are on 5.6 Discontinued models.
Around the printer

Installation: installed and commissioned by us, see 8.3 Installation. Outside Switzerland, each visit is quoted.

Repair: in our workshop near Zurich, see 8.1 Repair and RMA.

Labels and ribbons: from us too, chosen by what the label must survive, see the .
For the PD45S and PD45 on its own or with its installation, labels and ribbons, request a quote.
Last checked: 5 November 2026.
Preparing a validation, an inspection or a change to your labels?
The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.




