Epson ColorWorks D6500Ae and D6500Pe
An 8 inch industrial colour inkjet label printer with dye ink, 212 mm print width and up to 1,200 x 1,200 dpi, with auto cutter (Ae) or peeler (Pe).

maximum print width
print speed at 300 x 600 dpi, 203.2 mm wide
highest resolution, on glossy media
largest roll outside diameter
What fits the D6500Ae and D6500Pe
Drawn to one scale.
Labels: Labels on a backing 25.4 to 215.9 mm wide with a label 21.4 to 211.9 mm (Epson Europe gives 50 mm as the smallest width for the Pe); on rolls up to 152.4 mm across.
Inks: Dye ink in four 80 ml cartridges: cyan C13T58C240, magenta C13T58C340, yellow C13T58C440 and black C13T58C140, with the SJMB6000/6500 maintenance box.
See , or start from what the label must survive in the .
Specification
The base model. Options change some of these figures.
Printing
- Methods
- Serial inkjet, four colour (cyan, magenta, yellow, black), PrecisionCore print head with 800 nozzles per colour
- Resolution
- 300 x 600 dpi on matte paper and synthetic only; 600 x 600 and 600 x 1,200 dpi; 1,200 x 1,200 dpi on glossy paper, glossy film and high glossy paper only
- Print width
- Up to 212 mm
- Print speed
- 85 mm/s at 300 x 600 dpi on 203.2 mm width; 119 mm/s on 101.6 mm width; 156 mm/s on 25.4 mm width
- Speed by quality
- Speed 49 mm/s, Normal 34 mm/s (both 600 x 600 dpi), Quality 13 mm/s (600 x 1,200 dpi), Max Quality 6 mm/s (1,200 x 1,200 dpi), all on 203.2 mm width
- Cutter or peeler
- Ae: full-cut auto cutter; Pe: built-in peeler with a detector for a peeled label left at the exit
Labels
- Width
- Backing 25.4 to 215.9 mm, label 21.4 to 211.9 mm; Epson Europe gives 50 to 216 mm for the Pe
- Continuous
- Continuous paper without adhesive 25.4 to 215.9 mm wide
- Fanfold
- Fed from behind the printer on the Ae only: continuous paper 25.4 to 215.9 mm wide; die-cut labels on a backing 25.4 to 215.9 mm wide, label 21.4 to 211.9 mm
- Roll
- Up to 152.4 mm outside diameter
- Types
- Die-cut labels, full-page labels and continuous paper, detected by gap or black mark; roll or fanfold
- Stock
- Matte paper, synthetic, glossy paper, glossy film, high glossy paper
Inks
- Type
- Dye ink in four individual cartridges: cyan, magenta, yellow and black
- Capacity
- 80 ml per cartridge
- Cartridges
- Cyan SJIC55P-C C13T58C240; magenta SJIC55P-M C13T58C340; yellow SJIC55P-Y C13T58C440; black SJIC55P-BK C13T58C140
- Shelf life
- 6 months after installation, 3 years after manufacture
- Waste ink
- SJMB6000/6500 maintenance box, C33S021501
Connections
- Standard
- Ethernet 1000BASE-T, 100BASE-TX and 10BASE-T; USB 2.0 High-Speed; external input/output, D-sub 25
Printer languages
- ESC/Label; ZPL II emulation
Software
- Drivers
- Windows, Linux and Mac; SAP direct support
- Configuration
- Web Config in a browser; Epson Device Admin for printer fleets
Unit
- Size
- 444 x 515 x 326 mm, width by depth by height, depth without protrusions
- Weight
- Ae approx. 25.5 kg; Pe approx. 26.3 kg
- Power
- 100 to 240 V AC, 50 to 60 Hz, 0.9 A; printing about 39.5 W at 100 V and 38.7 W at 230 V; standby 7.51 W at 100 V and 5.82 W at 230 V
- Display
- 2.7 inch LCD
- Noise
- Ae approx. 55 dB; Pe approx. 60 dB
Environment
- Operating
- 5 to 35 °C, 20 to 80% humidity, non-condensing; barcode printing 15 to 35 °C
- Storage
- −20 to 60 °C packed with no ink charged, 5 to 85% humidity; −10 to 40 °C with ink charged, 20 to 85% humidity
- Altitude
- Up to 3,000 m
Options
Auto cutter (Ae) The Ae model has a full-cut auto cutter, and the paper can be cut by the application or with the Cut key.
Built-in peeler (Pe) The Pe model has a built-in peeler: the backing paper passes through it so that labels are printed while being peeled off, and a detector senses a peeled label left at the exit; Epson's range brochure adds a movable sensor on the Pe models, for printing on shaped labels without a second die cut.
Paper Holder C6500 A spare roll paper holder for the CW-C6500 and CW-D6500 series, so that the next roll can be loaded beforehand; Epson part number C32C881101.
Drivers and documents
- From Epson: the drivers, firmware and user guide are on Epson's page for the D6500Ae and D6500Pe.
- Set up as a fleet: Epson Device Admin.
- From label software: through Epson's driver, see Software licences.
- Calibration: PrinterCal, our own software, calibrates Epson ColorWorks printers.
Maintenance parts
Part-number search| Part | Epson part number |
|---|---|
| Maintenance box SJMB6000/6500 | C33S021501 |
The numbers are from Epson Europe product page, ColorWorks D6500Ae: consumables list. We supply these parts under our own article numbers.
What wears, and what shortens its life: 5.5 Printheads and wear parts.
Epson Europe states 12 months with on-site service, and its range brochure says the printhead and other working parts are covered under warranty for 1 year; the commercial warranty excludes inks and maintenance boxes.
Status
The D6500Ae and D6500Pe are current: Epson has announced no end of sale.
Older models and their successors are on 5.6 Discontinued models.
Around the printer

Installation: installed and commissioned by us, see 8.3 Installation. Outside Switzerland, each visit is quoted.

Repair: in our workshop near Zurich, see 8.1 Repair and RMA.

Labels and ribbons: from us too, chosen by what the label must survive, see the .
For the D6500Ae and D6500Pe on its own or with its installation, labels and ribbons, request a quote.
Last checked: 5 November 2026.
Preparing a validation, an inspection or a change to your labels?
The first engagement is free: a half-day review of your current label print chain, ending in a written list of gaps.




